Kubota Hst project .. what year ?

A

amsrn13

Member

Equipment
b6000
May 12, 2021
36
2
8
ct
Hey guys so I’m starting to tear apart this hst I purchased. I did a compression test and got 240,220 and 100 psi. I have the pistons soaking in acetone and atf, I’m going to see if that help break up some of the carbon. The other thing I can’t seem to find is the serial number or my tractor . It’s B7100HD67172 , can’t seem to find it on any website
 
L

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
4,831
1,584
113
Mid, South, USA
They're all low, obviously. 380+ should be where they need to be IIRC.

Don't know if acetone/trans fluid is going to help you but keep us updated.
 
85Hokie

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,319
2,152
113
Bedford - VA
amsrn13 said:
Hey guys so I’m starting to tear apart this hst I purchased. I did a compression test and got 240,220 and 100 psi. I have the pistons soaking in acetone and atf, I’m going to see if that help break up some of the carbon. The other thing I can’t seem to find is the serial number or my tractor . It’s B7100HD67172 , can’t seem to find it on any website
Click to expand...
THATS a 1992 model..........

67172 is the serial number btw
 
You must log in or register to reply here.

Top Bottom