Our local mechanic said he put hydraulic oil in the reservoir and it drain out, said it would need a new pump and would cost 2grand to repair it. I said no way. I brought it and drained all the oil and cleaned the filter. Not cleaned in 25 years. Took the pump off and took it apart. Notice the spline or shaft would only turn 1/4 turn I took it to a machine shop and they said it had a bur on it and ground it smooth. I put it back together. I took the loader off the tractor so it was easier to work on. I caped off the two lines comeing from the pto that supplied the hydraulics for the loader.I put some oil in the power steering reservoir and about 5 gallen in the transfer case. I started the tractor and ran a few minutes, to check for leaks. The power steering reservoir blew apart and hydraulic oil went everywhere. What do I do now?
Sent from my VS985 4G using Tapatalk
Sent from my VS985 4G using Tapatalk