High gear issue

[Gamecock]

I need some help with this one. My 4630GST will not move in gears 7-12 in 2wd or 4wd? I was pushing over small sapplings and doing some minor clearing work with my FEL and working in 4wd yesterday and suddenly it quit moving.
Is this something I can fix or do I need to take it in.
Thanks for any advice.

 

[Bulldog]

Does it move in the lower gears?

 

[Gamecock]

Yes, it moves in 1-6 both forward and reverse.

 

[Bulldog]

You didn't run a stick under there and bent the shifter linkage did you?

 

[Gamecock]

I looked and didn't see any sticks hanging. Can you tell me where to start? If its too complicated and lengthy please send me a pm so I can contact you.
Thanks.

 

[Gamecock]

I looked under the shifter and didn't see any stick lodged. I am probably not looking in the right spot...

 

[North Idaho Wolfman]

If I'm looking at it right the transmission on your model is electrically controlled, no manual linkage, for both the main shifter and range control.
Look at the shifter and the side of the transmission for damaged or disconnected wiring or components.

 

[Bulldog]

Does it have any error codes on the display? If so what are the codes.

 

[Gamecock]

Thanks North Idaho and bulldog. I do have the intellipanel and its not throwing any codes. I am going to check the shifter side for wiring issues. Hopefully its something simple. Thanks for the insight.

 

[Gamecock]

Got it fixed. Thanks to the forum.

 

[Russell King]

please explain what you found to repair and how you repaired it.