PTO engages occasionally, but not predictable. Anyone have any experience? PTO clutch is new, hydraulics work fine.
GF1800 PTO problems
- Thread starter rancefi
- Start date
Who put pto clutch in?
Any photos of the old one?
What symptoms lead you to get a new clutch?
Dave
A dealer replaced the clutch. I bought it because they couldn't get the PTO to engage and stay engaged properly. Can the one way shaft assembly be removed once the clutch pack is removed?
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
On the GF models the PTO case is on the front of the front axle and both the clutch and the one way clutch are in the same case.
Before opening it up make sure the input shaft is spinning, and then on removal make sure all the splines and couplers are good.
Before opening it up make sure the input shaft is spinning, and then on removal make sure all the splines and couplers are good.
I am having the same issue, sometimes it engages some times it does not. Where is the clutch located? I am new to lawn tractors in general, I bought a house and it came with a g1800 with a 48 inch deck. Would like to get this fixed because it is quite frustrating.
ve9aa
Well-known member
Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Nick288 - PLEASE PLEASE stop reviving all those ancient threads.
Most of those members are no longer active and you are plugging up the forum
with ancient history.
Send them a PM if you want to know.
GEEZ
Most of those members are no longer active and you are plugging up the forum
with ancient history.
Send them a PM if you want to know.
GEEZ
