Smokeless
Member
Equipment
3901/Loader/Rear Blade/Box Blade/LP Mower/Pallet forks IH M,,Cub & sickle mower
Kinda stuck and really dont have a good working knowledge on this D600 engine.
We used the tractor this past summer and parked unheated garage. Had trouble starting as cooler temps creeped in and now in the 20s, no soap.
QUESTION: Should I be reading a full 12v at the glo plug with the key on preheat? I am reading just a tad over 8V. I plan on cleaning the connections and testing them tomorrow, possible remove and place on spare battery.
I suspect the issue is further than glo plugs, there is a block heater I plugged it in and still would not start. So how does on verify the injectors.
We will purchase a WSM but not sure where or from whom. Fairly pricy. Any suggestions on trouble shooting appreciated
We used the tractor this past summer and parked unheated garage. Had trouble starting as cooler temps creeped in and now in the 20s, no soap.
QUESTION: Should I be reading a full 12v at the glo plug with the key on preheat? I am reading just a tad over 8V. I plan on cleaning the connections and testing them tomorrow, possible remove and place on spare battery.
I suspect the issue is further than glo plugs, there is a block heater I plugged it in and still would not start. So how does on verify the injectors.
We will purchase a WSM but not sure where or from whom. Fairly pricy. Any suggestions on trouble shooting appreciated