Fuel prices

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,872
3,167
113
Wind Gap, PA
I'm beginning to see reports of idiots drilling gas tanks. There was one reported today locally. However, the victim caught the dolt on her security camera. Not that repercussions are likely.
 

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,164
1,252
113
Gallatin, NY USA
I thought the same thing. This seems very dangerous to me.
Even if a tank is plastic the drill sparks a lot.
Sarcasm on. I am sure these clowns are using the same intrinsically safe tools I used in my Haz-Mat days.
 
  • Haha
Reactions: 1 user

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,140
2,788
113
SW Pa
Ya mean like beryllium hammers and stuff
 
  • Like
Reactions: 1 user

William1

Well-known member
Lifetime Member

Equipment
BX25D
Jul 28, 2015
1,084
268
83
Richmond, Virginia
I thought the same thing. This seems very dangerous to me.
Even if a tank is plastic the drill sparks a lot.
Most cordless tools today have brushless motors. The switch is a low amp, low voltage potentiometer that control a PWM circut. Nearly 100% safe. Not like the old Sears plug in drills of 1964 that showered sparks!
 

lynnmor

Well-known member

Equipment
B2601-1
May 3, 2021
1,314
1,030
113
Red Lion
Back in the 70's gas scam, thieves had just a smidgen of ambition and used ice picks on the thin steel tanks. The current crop are just plain lazy.
 

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,780
5,609
113
Pineville,LA
No gas, no problem…now will y’all form a single file line behind me and follow me to the empty car dealer lot and get your electric car.
 
  • Like
Reactions: 2 users

jkrez

Member

Equipment
Gr2120, LX3310, bh77 hoe, 64 inch commercial snow blower, landpride pallet forks
Apr 16, 2021
85
84
18
Berks County PA
Ya mean like beryllium hammers and stuff
I used to work in a beryllium factory. Never grind it or melt it without proper masks. N 95 are not enough. in its solid form it is fine. I’ve even showed friends it’s safe by licking it. BE copper is in more than you think, everything from circuit boards to ping golf clubs.
You are correct that it’s a non ferrous material that does not spark. Hence the reason to use on oil rigs.
 
  • Haha
Reactions: 1 user

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
Its funny, I used to leave my car running when I stop at the gas station to grab beer on my way home. Now I take the keys out 🤣 couple years ago nobody would steal a 2005 Ford Focus 🤣
Lol .. anything with gas in it is a target now!😁
 
  • Like
Reactions: 1 user

Freeheeler

Well-known member

Equipment
b2650 tlb
Aug 16, 2018
704
520
93
Knoxville, TN
Looking on the bright side ... marina gas will be so ridiculous, maybe everyone will stay off my lake this summer ;)
 
  • Haha
  • Like
Reactions: 2 users

aaluck

Well-known member

Equipment
L4400HST, Bush Hog 276, RDTH60, Speeco PHD, etc
Oct 9, 2019
928
746
93
Snowdoun, AL
marina gas will be so ridiculous, maybe everyone will stay off my lake this summer ;)
I can pretty much bet you that boat sales will go down drastically. I cannot imagine (and don't want to) filling my now-sold Cape Horn 27 with 175 gallons, averaging about 2.3 mpg. When going to our out fishing spots we were burning about 25 gph, or $150 per hour at a very conservative $6 a gallon on the water.

Just another sector of the economy to be hit--boats, on water places for boats and those that service them.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,140
2,788
113
SW Pa
Yeah but by the same token the prices should be pretty good for a really nice one :)
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
6,532
4,135
113
Eastham, Ma
I can pretty much bet you that boat sales will go down drastically. I cannot imagine (and don't want to) filling my now-sold Cape Horn 27 with 175 gallons, averaging about 2.3 mpg. When going to our out fishing spots we were burning about 25 gph, or $150 per hour at a very conservative $6 a gallon on the water.

Just another sector of the economy to be hit--boats, on water places for boats and those that service them.
I feel for the current owners of my 44' DeFever.
900 gallon capacity - marine diesel.
$5,400 for a fill from empty tanks?
BIG Ouch !!!
 

random

Well-known member

Equipment
L3301, bucket, backhoe, grader, plow, harrow, cultivator
Nov 2, 2020
717
401
63
NC
If the price of fuel stays high long enough folks will break down and electric powered vehicles, mowers, blowers, tractors....everything will be the cure. And folks will be glad to have it, and the government will be happy and in control!

We will have forgotten the price of materials to make the electric society function, including disposing of all the things that will wear out.
All the talk about pumping oil and its impact on fuel prices - how much else is impacted?

Over 6000 products are made from crude oil.
 
  • Like
Reactions: 1 user

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
My brother races modifieds or bombers on a dirt track and has just recently added a second car. These aren't the stripped down throw a roll cage in.. he's got a lot of money in them! This is going to put the hurts on him for sure, probably won't be able to race for points this year.. just the fun of it.. which is all fun anyways!

Wonder how much this will affect NASCAR if any.. I know their rich but prices could really go North!
 
  • Like
Reactions: 1 user