Hello, new member here, I would like to start off by thanking whoever created this site and all the members that contribute to it. I have been reading it for a while and it has helped me more than a few times. Now to the question. I read a post from back in 2014 about a member having divider block problems and it sounded similar to mine. I inherited a 1978 B8200 from my grandfather and have used it for the last 2 years almost daily. 2 weeks ago I started her up while I was greasing my FEL and I started hearing a noise from my divider block. When I got on it the FEL and 3 point would not raise and the noise got louder as I tried. I shut it down and started looking into it on the web. That's when I found that post. The following day I printed off a parts breakdown of the divider block, took it off the machine. I work in a die maintenance shop, so at work I took it apart and made sure seals and wipers were good. The valve springs functioned the way I believe they should but they are crimped in so I could not get a close look at them. Reassembled and put it back on tractor. It worked and was quiet for about 5 minutes then the sound came back along with lose of hydraulics. I know this is long winded, sorry. But would anyone have any advice or ideas as to what I should do next.
Thanks for any replies.
Thanks for any replies.