While changing the transmission fluid the 23 mm bolt on the left side was pulled out. This apparently let the pedal for the diff lock move left. Now the bolt will not go all the way in and the pedal is locked. How can I get this back?
Differential lock
- Thread starter Moldel t guy
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Have you had any luck yet?
I can't see how removing the bolt could cause a issue.
But it's not a huge job to remove the top cover/hydraulics to find the trouble.
No I haven’t, it’s working without it but I have no diff lock. I can’t find anything on it in a manual or parts breakdown.
thanks for asking
That plug may support the shaft. Maybe have someone jiggle the shaft while you screw the plug in? If that doesn't work, it's right there when you remove the top cover.
The plug does push against the shaft. I have jiggled wiggled and pulled it out as I’m tighteng the plug but it’s a hard stop before it get in all the way.
It's a real tight spring!
A real bugga to install
This might help 🤷 [ATTACH said:
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more