Carlisle farm specialist R1

[Deuce]

Good evening,

I'm looking to re-tire my b7100 (it's well over due) and am looking to get the carlisle farm specialist R1 ag tires. Curious if anyone has any experience with these?

 

[Lil Foot]

I have them front & rear on my B7100, and they are awesome. I pull stuff with these that would cause my old tires to just spin.

 

[North Idaho Wolfman]

They are excellent tires!

 

[tiredguy]

Deuce,
great tires made right here in the good old USA on top of being excellent
high quality tires. They're price really right considerably less than most
major brands and are sized to match the OE sizes most tractors come with.

That's very important as I've seen others such as the BKT brand that aren't
anywhere's near close enough to use without causing damage.
Al

 

[JeffL]

Great tires that last. I also have good luck with their trailer tires. Both seam to resist dry rot for a long time.

 

[Deuce]

Thanks for all the feedback! Looks like i'm definitely making the right choice. This could inspire me to re-finish the entire tractor now

 

[procraftmike]

I put a set of 6 ply on the front of my B7100 with loader, last spring. They have served me well so far.

 

[ch4rlie]

I have them front & rear on my B7100, and they are awesome. I pull stuff with these that would cause my old tires to just spin.

They are ok for the 4wd ratio? Do you by chance have the part number for front and rear you decided on so I can compare to my current tires on my B7100?

Thank you!

 

[Lil Foot]

They are ok for the 4wd ratio? Do you by chance have the part number for front and rear you decided on so I can compare to my current tires on my B7100?
Thank you!

They run perfectly with no binding.
The Carlisle part numbers are:
570002 for the 8.00-16
570030 for the 6-12 6 ply
(there is another 6-12 Carlisle tire that is only 4 ply)
I was told by a dealer that these tires match the stock ratios exactly, and tiredguy (a member) said that Carlisle has done their homework on matching their tires to original specs.

 

[ch4rlie]

They run perfectly with no binding.
The Carlisle part numbers are:
570002 for the 8.00-16
570030 for the 6-12 6 ply
(there is another 6-12 Carlisle tire that is only 4 ply)
I was told by a dealer that these tires match the stock ratios exactly, and tiredguy (a member) said that Carlisle has done their homework on matching their tires to original specs.

Awesome! Thanks so much just ordered them all, it will be a much needed improvement!