dont have the right fitting for guage. I got this unit on the cheap and restored it trans/hydraulic tank was really dirty screen was packed full of debris cleaned screen changed filter and fluid repeated the process. Steering did not work when I finally got the tractor started so I removed cylinder and repacked it bled air and still no power steering at fel line I put my guage on and got about 1100 psi so Im low on presure so I put a .1 , .2 and a .4 shim in releif valve that got me about 1300 still way low presure. FEL works fine and runs great forward and reverse. So I thought the priority valve spool may have trash in it. I think the pump is good but it may be wore out not sure. So I thought maybee someone could tell me where the priority spool was so I could pull it and check for trash. Or maybee I need to pull that whole valve assembly. I have totaly restored and painted. Working on backhoe next.
