Hey guys, first time post. I've had my BX for 2 seasons now and I think it has about 350 hrs on it. I notice a banging noise coming from the front axle as it is driven. It's worse with a loaded FEL but seems to have progressed to the point where it does it all the time. I've re-torqued the pivot bolt to max spec but it didn't help much. The problem is that there is play between the axle cylinder ends and the mounting bracket. You can actually see the front axle cases moving side to side from the drivers seat when going straight over the ground The cyl bracket ends don't look bent or anything. Has anyone else experienced this? Has anyone had to shim the cylinder ends or maybe have a different fix?