Big Pop

Jasper2018

Member

Equipment
Kubota L3130. LA723 FEL, L3901 HST, LA525, bush hog rotary cutter,
May 25, 2021
49
21
8
Florida
I have an older L3130 that I had been using for about 4 hrs Sunday. Turned it to get something to eat and when I tried to start it as I turned the key heard a loud pop from behind the dash. It was getting dark and couldn't get to work on it until this Wed. Looking to see if anyone has a idea of what it could be before I can get to it.
Thanks in advance.
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
5,724
3,037
113
Texas
IMG_2496.png
 
Last edited:
  • Like
Reactions: 1 users

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,356
2,172
113
Bedford - VA
I have an older L3130 that I had been using for about 4 hrs Sunday. Turned it to get something to eat and when I tried to start it as I turned the key heard a loud pop from behind the dash. It was getting dark and couldn't get to work on it until this Wed. Looking to see if anyone has a idea of what it could be before I can get to it.
Thanks in advance.
I would say a fuse blew - I take it, it does not start? or?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,726
5,134
113
Sandpoint, ID
I have an older L3130 that I had been using for about 4 hrs Sunday. Turned it to get something to eat and when I tried to start it as I turned the key heard a loud pop from behind the dash. It was getting dark and couldn't get to work on it until this Wed. Looking to see if anyone has a idea of what it could be before I can get to it.
Thanks in advance.
What is it doing or not doing after the POP?
 

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,132
722
113
Oregon
You should be able to get a fair look under the dash with a good flashlight. I did some wiring on my L3830 recently and I could see most of the stuff under the dash. I’m guessing maybe the ignition switch or a harness connector?
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,128
933
113
Williamstown Ontario Canada
I have an older L3130 that I had been using for about 4 hrs Sunday. Turned it to get something to eat and when I tried to start it as I turned the key heard a loud pop from behind the dash. It was getting dark and couldn't get to work on it until this Wed. Looking to see if anyone has a idea of what it could be before I can get to it.
Thanks in advance.
I looked at the wiring diagram for the L3130 HST model and was surprised to see 5 slow blow fuses in addition to many regular fuses.
forum L3130 slow blow fuses .jpg

Here is a slow blow color chart up to 60 amps but the wiring diagram has one going to 80 amps.

slow blow fuse color code.jpg

Answer North Idaho Wolfman's question about what is or is not working now. It will help zero in on what color of fuse may have blown.

Please post photos of the top of your batter + where the ground cable connects to the frame. A poor connection can fail under load with a pop.
Dave
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
5,724
3,037
113
Texas
Maybe helpful….maybe not…. but my tri-toon boat had a fusible link which “blew” shortly after I bought it. Being anxious to get it in the water…and the dealer being a long ways off….. I grabbed an automotive 50A self-resetting circuit-breaker …. wrapped it in electrical tape for waterproofing….and it’s been in-service for 3 years without issue.
 

Attachments

Jasper2018

Member

Equipment
Kubota L3130. LA723 FEL, L3901 HST, LA525, bush hog rotary cutter,
May 25, 2021
49
21
8
Florida
After hearing the pop, tried to start.....nothing. No dash lights or headlights. Trying to get out to where it is tomorrow. Will post what I found.
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,726
5,134
113
Sandpoint, ID
Check fuses and then tell us which one is blown.