B7100 front axle pivot point

Rodnok

Member

Equipment
B7100hst, MMM, Box Scraper, FEL make unknown, adapted and resurrected from junk
Dec 28, 2015
48
0
6
chattanooga, tn
There is a slight bit of play forward and back wards in the front axle on my B7100. i can see the axle move when I turn the steering wheel left and right.It also makes a clunking noise.Is this a normal condition?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,996
5,329
113
Sandpoint, ID
There is a slight bit of play forward and back wards in the front axle on my B7100. i can see the axle move when I turn the steering wheel left and right.It also makes a clunking noise.Is this a normal condition?
Yea pretty normal, you can pull the cotter key out and tighten the bolt a little and see if that takes the play out, other wise you pull the bolt and replace the washer on the bolt.
 

Rodnok

Member

Equipment
B7100hst, MMM, Box Scraper, FEL make unknown, adapted and resurrected from junk
Dec 28, 2015
48
0
6
chattanooga, tn
How many hours are on your tractor?


It shows 534 hours on meter but meter does not change since I got it a couple years ago. By serial number it is approx 1995 year.


Sent from my iPhone using Tapatalk