B6100D hydraulic pump

Lyzic

Member

Equipment
6100
Apr 16, 2022
32
0
6
Canada
Does anyone know if the high pressure out on the B6100D stock hydraulic pump is the top or the bottom line?

I can't find a manual for this tractor that tells me. I can pull them off and see but I'm hoping one of the gurus will know and save me a little bit of labour :)
 

kubotasam

Well-known member

Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
Apr 26, 2010
1,200
125
63
Alfred Maine
I believe it is the one on the bottom of the pump. It will be the smaller diameter of the two pipes.
 
  • Like
Reactions: 1 user

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,418
1,237
113
WestTn/NoMs
Does anyone know if the high pressure out on the B6100D stock hydraulic pump is the top or the bottom line?

I can't find a manual for this tractor that tells me. I can pull them off and see but I'm hoping one of the gurus will know and save me a little bit of labour :)
There is a repair manual for this model at www.kubotabooks.com. It's an I&T, not genuine Kubota, but it should help you. It's in three parts, the hydraulics is in part 3. I've found these to not be 100% accurate, so double check when using it.

Assuming the manual is correct, this diagram shows the suction on top. You could verify with the parts diagram.

Screenshot_20220425-184824-169.png
 
  • Like
Reactions: 1 user

torch

Well-known member

Equipment
B7100HSD, B2789, B2550, B4672, 48" cultivator, homemade FEL and Cab
Jun 10, 2016
2,593
836
113
Muskoka, Ont.