4590 backhoe on L 3650 upgrade.

[jgum]

Would it self destruct if i plumbed a remote to the rear of my tractor that i could quick couple my backhoe hydraulics into and bypass using the pro mount hydraulic pump???? Any advice or ideas appreciated

 

[North Idaho Wolfman]

You can do that but it's going to be much slower and have less power over a remote hydraulic pump.
If you do it flush all of the system out and use the same fluid as your tractor in it.

 

[jgum]

You can do that but it's going to be much slower and have less power over a remote hydraulic pump.
If you do it flush all of the system out and use the same fluid as your tractor in it.

I thought since the pump had less gpm than the tractor it would make it more powerful to use the tractors hydraulic pump

 

[Jchonline]

I thought since the pump had less gpm than the tractor it would make it more powerful to use the tractors hydraulic pump

Your tractor pump has to run other things like power steering, hydrostatic transmission, etc. If the pump were strong enough Kubota probably would have matched a backhoe with no secondary pump in it. Look at the B26, L47, M62...they all have internal pumps for the backhoe. Could be wrong but I think the M62 had 2 pumps.

 

[North Idaho Wolfman]

I thought since the pump had less gpm than the tractor it would make it more powerful to use the tractors hydraulic pump

It might be, and if so you'll be fine.

 

[TheOldHokie]

Would it self destruct if i plumbed a remote to the rear of my tractor that i could quick couple my backhoe hydraulics into and bypass using the pro mount hydraulic pump???? Any advice or ideas appreciated

I thought since the pump had less gpm than the tractor it would make it more powerful to use the tractors hydraulic pump

If the tractor pump produces more flow and the same or greater pressure as the PTO pump it will work just as well if not better than the PTO pump. You need to know those numbers.

Dan

 

[North Idaho Wolfman]

The BL4590 had a factory 5 GPM pump and the L3650 has a 7.8 GPM main pump.
So you'll have enough flow.

 

[jgum]

I believe I’ll leave it alone designed that way to begin with. I’ll plum it in if my secondary pump on my backhoe fails

 

[jgum]

The BL4590 had a factory 5 GPM pump and the L3650 has a 7.8 GPM main pump.
So you'll have enough flow.

Wolf man my l3650 needs a wiring harness but I’m having trouble finding stuff for it do you have any suggestions?

 

[fried1765]

Your tractor pump has to run other things like power steering, hydrostatic transmission, etc. If the pump were strong enough Kubota probably would have matched a backhoe with no secondary pump in it. Look at the B26, L47, M62...they all have internal pumps for the backhoe. Could be wrong but I think the M62 had 2 pumps.

The L48 TLB actually has 3 hyd. pumps

 

[North Idaho Wolfman]

Wolf man my l3650 needs a wiring harness but I’m having trouble finding stuff for it do you have any suggestions?

I've been able to find plug end sets on eBay and amazon in the past.
I'll look and see if I can find the listings.
And you can get all the right size and color wiring on ebay too.

 

[jgum]

I've been able to find plug end sets on eBay and amazon in the past.
I'll look and see if I can find the listings.
And you can get all the right size and color wiring on ebay too.

Thank ya sir

 

[jgum]

Thank ya sir

I tried looking up electrical wiring components for L 3650 no luck

 

[North Idaho Wolfman]

Give me a few more days, I haven't gotten a chance to look at all my notes on these.

 

[jgum]

Alrighty thanks wolfman

 

[North Idaho Wolfman]

Alrighty thanks wolfman

I do believe this is what you are looking for.

6.3MM Electrical Automotive Wire Connectors Male Female Socket Plug Terminal for | eBay

✅【QUALITY MATERIAL】 Very sturdy and well built auto wire connectors are made of well selected nylon material, which is heat- resistant and high performance with insulating housing. Pins are made of brass which has good conductivity.

www.ebay.com