3 pt Leveling Arm with Crank

[TLevkulic]

Hello,
First time, recently traded my JD 950 for L2610, everything about the new Kubota is great. However, I really miss the hand crank on the JD 3pt leveling arm, a small device I always used when pushing snow with the back blade. Question looking for an aftermarket piece or recommendation that would be similar to the JD one - any help out there would be GREATLY appreciated.

Tom

 

[edritchey]

leveling rods and boxes

qualityfarmsupply.com

 

[85Hokie]

So - this is a PITA? I can see that being the case!!

 

[TLevkulic]

leveling rods and boxes

qualityfarmsupply.com

That was easy! Thanks

 

[GreensvilleJay]

gee, you could have the spare off my Ford 8N......but then there's shipping cross the heavily guarded northern boarder to deal with......

 

[Motion]

Consider a top and tilt conversion.

 

[dkbswim]

I installed the Ratcheting ASSY ROD,LIFT from the B2650 Part # 6C170-65305 on my B2601

 

[Sporto]

I am in the process of installing the ratcheting lift rod as well on my B2601

 

[hodge]

Weavers Compact Tractors also carries them.

Buy your Compact Tractor Parts online • Weaver's Compact Tractor Parts

Adjustable leveling box

www.compactractorparts.com

They have 3 different sizes. I bought one for my John Deere, and it's been a great addition.

 

[Smokeydog]

Upgraded leveling box , sway bars and Pat’s quick hitch on the B26 first thing. Nothing but joy. Note extra part from sway bar used to connect top of leveling box.

 

[Thunder Fish]

My Grey Market ZL2202DT-M had a electric leveler on it by the time I got the tractor just the wiring harness is left Munroe Matic

 

[Downeaster]

View attachment 120064
Upgraded leveling box , sway bars and Pat’s quick hitch on the B26 first thing. Nothing but joy. Note extra part from sway bar used to connect top of leveling box.

Now that would be handy. i like the pin's on the adjustment. Even better if we could get some that fit and were magnetic.

 

[rswilliams]

View attachment 120064
Upgraded leveling box , sway bars and Pat’s quick hitch on the B26 first thing. Nothing but joy. Note extra part from sway bar used to connect top of leveling box.

Can you show the upper attachment of your leveling arm?

I have been wanting to get one from Weavers but the top attachment will not work on my LX2610.

Thanks

 

[Smokeydog]

Can you show the upper attachment of your leveling arm?

I have been wanting to get one from Weavers but the top attachment will not work on my LX2610.

Thanks

I will. BH is on now.

if you noticed I had to use an U link(blue) that was extra from the modified sway control bars to connect at top. Weavers should have a similar piece available to make that connection. Just have to be mindful of overall length.

 

[Runs With Scissors]

gee, you could have the spare off my Ford 8N......but then there's shipping cross the heavily guarded northern boarder to deal with......

Easy fix for that.

Send it to El Salvador in "Care of MS-13"

It will be across our southern border in no time.

 

[Smokeydog]

Not much to it.

 

[rswilliams]

View attachment 123222
Not much to it.

Perfect! Thanks for the picture.