Looks like I'm going with the Titan hardened 1055 carbon cutting edge for my 60" bucket on the B2650.
Is 1/2" good enough or am I better off going 5/8"?
I noticed the bucket itself is pretty thin and weak, seems like 5/8" is a bit overkill but if will actually help and not hinder I'll go that way.
Is 1/2" good enough or am I better off going 5/8"?
I noticed the bucket itself is pretty thin and weak, seems like 5/8" is a bit overkill but if will actually help and not hinder I'll go that way.