Go Back   OrangeTractorTalks - Everything Kubota > Kubota Talk > Service, Repair & Maintenance

Service, Repair & Maintenance Offer your Kubota service advice, repair procedures or maintenance tips. Have a service related question? Post here.

Reply
 
Thread Tools Display Modes
Old 06-28-2013   #1
ttfo
1st Yr. Apprentice
 
Join Date: Oct 2012
Location: Custer, SD
Posts: 35
Default pushrod setup b7100hst

i removed the pushrods on my b71hhst, and di not take any pics, because I do have a service manual and Kubota part diagrams.
I have the 6 pushrods and 6 caps. in all diagrams they do not show the caps. can anyone show me whre the caps go? they look like they go at the bottom of the pushrods against the lifters. But how do they stay on the pushrod while installing?

Thanks
ttfo is offline   Reply With Quote
Sponsored Links  
Advertisement
Old 06-28-2013   #2
meanjean
4th Yr. Apprentice
 
meanjean's Avatar
 
Join Date: Aug 2010
Location: Hazelridge, Manitoba
Equipment: Kubota L1801
Posts: 918
Default Re: pushrod setup b7100hst

Good morning ttfo.
I'm not 100% certain that this is proper but I've gone thru the same process with a similar machine.

Do the caps have holes in the sides near the bottom?
The caps should sit under the pushrods as you suggested.

But how do they stay on the pushrod while installing?
The push rods sit in the cups.
I believe they may actually be magnetic, mine were.
meanjean is offline   Reply With Quote
Old 06-28-2013   #3
ttfo
1st Yr. Apprentice
 
Join Date: Oct 2012
Location: Custer, SD
Posts: 35
Default Re: pushrod setup b7100hst

meanjean,
Thanks for the quick reply.
Mine do not have any holes and are not magnetic.

Thanks,
ttfo
ttfo is offline   Reply With Quote
Old 06-28-2013   #4
North Idaho Wolfman

VIP Service Tech
 
North Idaho Wolfman's Avatar
 
Join Date: Jun 2013
Location: Sandpoint, ID
Equipment: L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Posts: 19,780
Default Re: pushrod setup b7100hst

On a D750 The cups or caps go on top of the valve stems, not the push rods.
North Idaho Wolfman is online now   Reply With Quote
Old 06-28-2013   #5
meanjean
4th Yr. Apprentice
 
meanjean's Avatar
 
Join Date: Aug 2010
Location: Hazelridge, Manitoba
Equipment: Kubota L1801
Posts: 918
Default Re: pushrod setup b7100hst

Attached is a picture of my head from above.
The push rods are beneath the 4 slotted bolts at the top of the picture.
The cups fit under the push rods, I wish I had a better picture.
One end of my push rods are magnetic.

Sorry bud, I thought the set up would be similar.
Attached Images
 
meanjean is offline   Reply With Quote
Old 06-28-2013   #6
ttfo
1st Yr. Apprentice
 
Join Date: Oct 2012
Location: Custer, SD
Posts: 35
Default Re: pushrod setup b7100hst

wolfman,
Thanks... I did have some pics of the valves and now I see them. For some reason I thought they went on the push rods. Thankkkkkkkkssss....

MeanJean.
Thanks for replying...

ttfo
ttfo is offline   Reply With Quote
Reply

Tags
b7100hst, push rods

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 05:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.