Search results

will the rops bar off an b7300 fit on my b8200hstd . thanks fj55-100

Yea it has 2 cylinders on the arms. that the piston is 1 1/2, and one that tips the bucket same 1 1/2 . my b8200 loader pistons are smaller 1 1/4

I have a l1500dt as well and it has a kelley loader that uses the tractors pump . seems to work good . But when i bought it it had a broken engine block . where the axel stand bolts to the block .the loader did not use the full frame mount system that the newer ones use .and with a full bucket...

how do i find out which backhoes would be the right size for my b8200 . I would prefer a factory kubota one but there seems to be a bunch of different ones , and i dont want to buy one that would be too large for the tractor to use . Which ones do some of you use on you similar kubotas . Thanks

yea but back then i made 50k a year and a crank was 78 $bucks

Thanks , I got the engine out tonight using the old l1500dt as a engine hoist , I will try to tear it down teusday, . then i will see what the machine shop finds , . Tractors are a new thing to me . but I have been a auto mechanic for 30 years ,20 with Lexus in the countermeasure field tech ...

so i am going to overhaull the d950 in my new to me b8200 . and the rod bearing in cylinder 2 is rough . i plan to send the crank out to have it machined . but my question is who do i buy the bearings and gaskets from . i dont have a good dealer near by . can anyone sugest a knowledgeable kubota...

thanks . on my way saturday to pick it up..

Hi i have a question for the masters, i have a l1500d with a kelley loader that i recentley bought to maintain my 2 acres .old some issues but a good tractor . But i found a b8200d hst with a factory loader for a good price . not knowing anything about tractors is the b8200 better ? . i...

it was running poor , mabey that was why . I took the injectors out and cleaned them . and it runs way better , used it for 3 hrs around the lot to push dirt where i needed it . I will leave the fuel on and if does it again i will replaced the injectors Thank you Vic.

total newbey question . I replaced all the hoses on the loader . and went out back to push dirt when it stalled .like it ran out of fuel ,the tank was near empty .and the oil was over full . i had run it 2 nights before with no issues . I replaced the oil added new fuel and it ran fine ...

Thanks , not many driveline shops here , but i know a few good ones in CA . new yolk will fix it for now . with puting a pin through the hole to stop movement . but i will still need to someday find the out put stub shaft out of the transfer case . Or else i will be real busey re welding all...

The front driveshaft on my L1500dt has taken out the splines on the yolk that has the u joints . the one that comes off the transfer case , and has made the shaft out of the transfer case in poor condition . I havent been able to find a part number for the shaft yolk or the output shaft from...

Vic , thanks I have pulled off the metal lines and found blockage in one of them. cleaned the injectors .and have the cover off and watched the cam move the pistons . when i used the book it said to bleed the filter until it ran out then bleed the line to the pump till it ran out . then turn...

Hi . cool forum. my injector pump on my l1500 wont make pressure . i have bleed it many times , i found a small amount of debri under the outlet . but still wont pump . the engine is a z750 . I found a pump that looks the same but the part number is off by one digit . mine is listed as a...