Search results

Well, after getting it parked where I could get under it and get a really good look, look what I found hiding on the back side.... 🤣😂 The spring pin has popped out just enough to be hanging on by a thread but, far enough out to not engage the shaft. Problem is that thread it's hanging by must...

Ordered 2. It's relatively easy to get to and I won't have to take anything apart to get to it. Thanks again.

That's not the correct drawing for what I have but, it motivated me to go out and give it one more good going over and, yep, that's it! A roll pin (#15 in this drawing) fell out. Like I said, I'm not a mechanic and even knowing where it is, I tried following this drawing and it still doesn't...

Yeah, already looked. I can handle general maintenance and maybe some fairly easy fixes but, I've looked best I can and everything that I can see from the outside looks connected and is moving like it should, but the lever just moves back and forth without any pressure/resistance like you'd...

Hey guys, working out in the field today and reached down to lift my 3 point and felt the usual resistance on the lever that you'd expect but suddenly it just lost all resistance and now the lever just flops back and forth with like it's not connected to anything. I checked and everything looks...

Interesting but, sounds expensive. I haven't seen any posts about how the seat is other than the ones here that say it was worth the money so, can you point me to some of the problem posts? I sure don't want to spend the money just to find out its crap. I'm not a small guy (250 lbs) so I want...

Excellent. Thanks. Did you have any issues with the installation.... wish you would have done differently or known about beforehand? Or just any advice in general before I pull the trigger on this? Again, thanks.

Not sure if this is the right forum but, I really need to upgrade my spring suspension seat to an air ride. I've got a bad back so I need all the help I can stay in the seat as long as possible before having to give up my keys permanently. I've got an MX5400 and wanted to see if there's an OEM...

Yeah, it doesn't make sense to be either. But the only thing I can think of is that the top link generally doesn't have the same stress applied to it as the main lift arms do. The top link is used to tilt the implement forward or back, but the arms are really what carry the weight and push/pull...

it's setup for Cat 2 implements so I'll just bite the bullet and order the Cat 1/2 so I'll have the same setup I've got now just with a hydraulic top link instead of a manual. I usually end up making things worse for myself trying to make things fit instead of just getting what I need from the...

Yeah, I don't get it either. The specs for the tractor list it as having a Cat 1/2 3-point hitch (it's a 2021 model) and after taking my caliper to it, the 2 lift arm pin holes are 1" and the connection pin hole(s) on the tractor itself for the top link is 3/4". Thats where I was getting...

Hey, I've got a MX5400 which has a cat 1/2 3-point. I checked and the top link pins are 3/4" and lift arms are 1" so, does being a cat 1/2 mean that he lift arms are cat 2 and the top link is cat 1? Reason being, I'm looking for a hydraulic top link and obviously need to know which cat I will...

Hey Guys, Just had 2 rear remotes added to my MX5400. They dropped it off for me a couple days ago and has been parked until today when I got in it and found the front-end loader will curl but won't lift.. well it did lift about a foot and stopped. My 3 point will not lift at all and my...

I have thought about a standard tool box and it would give me more options than an ammo box as far as size and maybe a tray inside it. But my problem is that I need good place to mount it either in the cab behind the seat or maybe outside on the back of the cab. I may look at the front end...

I have thought about the ammo box but I have a cab so I can't mount it to the ROP's. I was looking for something that I could maybe mount behind the seat or to the outside of the cab like on the back.

I would like to find a way to install a tool box inside my tractor cab. Nothing big, just something to hold things like plyers, a vice grips, a common sized wrench or two, wire cutter... Things you might need out in the field. I wouldn't be against mounting it to the outside but obviously it...

Yeah, I know. I was just joking about it since things are so scarce these days.

Great! Thanks Matt. I greatly appreciate it. Now, can you tell me who has them in stock? 😂🤣

Ok, I'm looking to add at least a couple of rear remotes to my MX5400. Just to find out what I need seems to be an impossible task. There's no where I can find that can tell me "oh, you want rear remotes for your MX5400? Ok, you will need a lever (part ####), a connection kit (part ###),... "...

I got lucky on my 3rd function kit. It only took 3 or 4 weeks for it to come in. I guess it’s just the luck of the draw as to what’s available when.