Search results

The left outside door handle on my 2003 M9000 came off in my hand the other day. It has very low hours but sat outside impounded for 7 years. I am wondering if the sun may have been a factor or is this a common problem. Anyone else had their door handle break?

Before I start cutting hose and spilling fluid can anyone tell me what hose size valve I need to add a manual shut-off?

My M9 has done very well this year. I did have to add a small can of Freon before 2nd cutting. I have noticed that randomly the air will start to get warm in the cab and I can look up to see the A/C light is Off. I can push the button off and then back on and everything is fine. It would be hard...

I have a cracked auxiliary control valve on my M9000. It looks like it is a bad casting that finally let go. The Kubota part number is originates at 3A161-82540 and I see the 3rd character changes but it seems to be the same valve across several models. I have also seen P/N 3T400-82540. They are...

I need to replace one of the auxiliary control valves on my M9. It has cracked from what looks like a bad casting. I will have to stay with something on the used market. Any help is greatly appreciated.

Is it even possible on a M9? I will never have a loader tractor without a shuttle again. I have a M9 with mechanical shuttle and a New Holland with a hydraulic shuttle. You do not realize the advantages of a hydraulic shuttle until you go from one to the other. Like going from no shuttle at all...

I think this same problem started last year with my M9. I thought I had gotten bad fuel because the tractor would run normally then loose power almost stalling then run normally again for a few minutes. I drained the tanks (did not remove them), removed the crossover tube and inspected. I tested...

I did a full replacement of all the major components on my M9000 last year. It does okay but not great. I had an A/C mechanic (not a Kubota specific mech)check it last week and he said the pressures are within range but something is causing the compressor to cycle on and off. The discharge...

I am in the early stages of getting equipment ready for hay season. My M9000 is running good and has just under 1,200 hours. Sometimes at startup I hear a very slight "ticking" usually for a short period. I have been told it is normal Kubota noise but want to be sure. Is there a recommended...

I have had my M9000 for 3 years and it has been a strong running, reliable tractor. After our first hay cutting this spring, which takes about 30-40 hours per tractor my M9 started loosing power after running for a short amount of time (15-20 minutes). It never stalled but would smother down...

I am having a starting/wiring issue on my M9000 2WD cab tractor. I have manuals but all I have is line diagrams. I think it would really help me if I had a schematic diagram to help me figure out where on the tractor the wiring is going. Does anyone know where I may find schematic diagrams? Thanks,

I am not certain what the original problem was. While cutting hay my M9000 would loose power and smother down like it was going to stall. It would clear up for a few minutes then do it again. I limped along and finished cutting hay. Today I drained both tanks, removed the crossover (which was...

I have a M9000 with the blower/evaporator housing mounted above the cab. Recently the compressor locked. I finally recieved all my parts/tools and did the repairs Monday & Tuesday. Replaced the compressor, condenser, expansion valve, and receiver/dryer. Flushed the lines and evaporator and...

I have a Kubota M9000 w/cab. Three days in a row, after running the tractor for 4-5 hours the A/C stops working and the belt running the compressor squeals. I tightened the belt but when this happens the compressor is feels hard to turn. Does this system have a high pressure switch? If so where...

The clutch on my 2003 M9000 makes a mild noise when setting still. It shifts and pull fine. Is there a way to grease the bearing? The tractor has about 1100 hours on it. Thanks,

I have a M9000 with two remote auxiliary valves. I would like to change one valve to an open center, float valve for running a disc mower or batwing. I do not see an option for an open center valve when I look at a parts diagram. Can anyone help explain how to make this change. I have the...

I have a M9000 with an analog tachometer and gauges. As all tractors I can estimate mph by the chart but want to add a digital speedometer for haying. I see a lot of low priced gps speedometers. The tractor just has a basic radio (no gps) so I do not know it/how a stand alone speedometer works...

Hello, Thanks to anyone who can help. I recently purchased a 2003 M9000 cab tractor with 789 certifiable hours. The tractor sat outside confiscated by the DEA for 7 1/2 years. It runs out very well but I bought the tractor before I found out about the apparent chronic A/C issues. When purchased...