Search results

I got the L4760 from the jump. Dealer had one and the price was right. 2 regrets - 1- should have gotten the rear remotes and the 3rd function when I bought it 2- didn’t exist when I got it - but wish I had R14s and not the R1s

For everyone here waiting who may need to install the kit themselves… it’s easy. https://www.orangetractortalks.com/forums/threads/kubota-3rd-function-kit-install-lxx60-hstc-part-l2265.59390/

I did - Teflon tape - because all the factory fittings have that as well... (now watch people freak the F out even tho tape is used on all sorts of equipment around the world) I have also used the Oatly white.

The instructions are lacking in this area - and so is my writeup... because you can't mess it up. I think every single connector on the harness is different - and that makes it actually really easy to figure out when you get into the panel. You will see what goes where and then when you are...

You totally should - and send pics please...

After a bunch of farting around with this. And let me be clear. Some of the bolts to loosen on the loader mounts are NOT simple to get at. Anyhow - I think I have things more acceptable- kinda in the sometimes it appears level. Sometimes it seems still off 1/2”. I mean I lived with JT off by 2”...

Yup. It’s the OEM kit. Everything you need.

Ok. I measured. And I’m more confused. the left side of the bucket or snow blower is high by 1-2” the right rear axle center is about 1/2” higher off the ground than the left. Would that not be the opposite of what you expect. Especially since putting a 1/2” board under the right wheel (which...

Well - It’s not the tire pressure. I inflated up the right rear to 18psi and left the left at 15psi and things are still not level. That suggests now I guess the loader brackets are uneven. The side that’s too high is “easier” to screw with and see if it can be lowered. Which side would folks...

Well - that's it!!! And to validate - if I toss a 1/2" thick piece of OSB on the floor and drive the left rear on it - the loader lowers to the floor perfectly even! Even bigger bonus the one pin for removing attaching - that thing slides in and out no probelm now! I can't even imagine how...

@Henro - Will do this today... It dawned on me in the middle of the night - it's 100% NOT my loader... how do I know 100%... Well - the sub-frame mounted Kubota snowblower is off EXACTLY the same amount when that's installed - left side is higher than right side about an inch - inch and a...

Well. I checked tire pressure in the fronts. They were the same. Rears are full of beat juice. So I got the valve stems up to 12 o’clock and checked pressure. They seem the same I guess. Couldn’t get a consistent reading as it seemed to still burp some fluid out. Been this way since delivery...

It’s very difficult when you aren’t at the tractor Dan. And thanks for just answering with the ISO B - that’s what I was looking for.

Yes the quick couplers. I need a set of females for a home brewed attachment of the OEM 3rd function at the quick connect where all the connections are on the loader attachment - not the end by the bucket. I had some 1/2 “pioneer” style that I thought were right but they are 3/8. But I don’t...

Ok. I’m a smart guy (so people tell me)… Please tell me like I’m 5 - on a Kubota Grand L60 series…. The connectors are 3/8” - what ISO standard - because I have enough of the wrong sized, leaky, too big, whatever’s. Please - for the love of god help a brother out… what ISO spec is on my tractor...

Let me start this by saying the loader itself is not tweaked unless it has been from day 1 brand new. It’s been this way for over 150 hours not getting any better or worse. The FEL on my L4760 has never been completely level with the bucket to the ground. The left side is usually 2”-ish higher...

I did as a matter of fact. There was spot that looked like a robotic alligator bit it.

Homestead built my grapple in about 8 weeks and shipped it via free shipping to my house. All I had to do was unload it from the truck and put it on the end of my loader. Free shipping was “free shipping”, not “free shipping*”

Well. Ended up NOT needing to pull the wheel so this thread was pointless. I think if you are installing all 3 rear remotes you need to - but I only did 2 and there’s enough room to do all them without removing the wheel for that access panel.

Thank you to members here who messaged me about some for sale. https://www.orangetractortalks.com/forums/threads/kubota-3rd-function-kit-install-lxx60-hstc-part-l2265.59390/