Search results

Ok I guess the only way yo check that is to split the tractor? Orbis there a way to see it from underneath?

Thanks Dave. Are you referring to the clutch throw out bearing? That is well greased and moving freely I believe.

I have an clutch issue with my 88 b6200d. Last year I installed a new clutch fork (it snapped) and adjusted clutch. That seemed to go fine. Clutch engages and disengages about halfway through the motion of the pedal. However, you need to extra extra cautious letting the clutch out...or it bangs...

$400 can or about $285 us.

That's supposedly an 8" I beam....

Looking at purchasing this homemade rear blade for my B6200. Its 5' wide, swivels 360 degrees and was supposedly on a sub compact before. Does this blade look to be too heavy for a B6200? (I believe the B6200 is good for 1000 lbs on 3pnt)

Perfect, thanks guys!

This is the pasrt diagram, and there is no mention of a grease nipple...very strange

Just doing the yearly servicing on my 88 B6200D 4x4. I've greased every nipple I could find, but I cannot for the life of me find the nipple for the front axle pivot point (dead center of axle under frame).. Is there even one there?

Bring on the snow!

Trying to fix the foamy hydraulic fluid issue in my b6200d. Fluid foams when in use, but clears up after a few hours. Getting air somewhere but want to ensure the hydraulics are venting. I have heard the vents plug up. I have read that the vent is under the top link bracket, but for the...

Very strange......Messicks also does list them as rubber o-rings. However, after disassembly, they are indeed copper sealing rings.

Perfect! thanks all

My 88 B6200 keeps foaming the hydraulic fluid, and from what I gather, it is most likely caused by a leak in the suction side of the pump. A day after using the tractor, the fluid looks fine ( no bubbles). Anyway, I want to replace the 4 o-rings in the suction tube in attached pic. I...

Took mower off tonight and got a good view of the carrier and clutch fork. the carrier moved freely and had lots of grease. The fork however was toast. Looks like one side has been broke for a while and the other is what just broke. So this is good as I am able to replace that without...

When is pressed the clutch that last time it almost felt like something let go or broke. Could the shift fork dislodged from the release bearing, bushing?

I have a 1988 B6200d 4x4 and while finishing the last row of mowing today, i depressed the clutch and the tractor kept going, I have no resistance on clutch other than the pedal spring. Before that it worked fine and made no weird noises. I reached my hand inside the bottom hole and \I can...

Thanks all....I was worried that I wouldn't be able to back into a pile of dirt 3 or 4' tall. Sounds like I can do it. Sounds fun too!

I have a few areas in my backyard where I want to fill and level. I estimate it will take 2-3 tandem loads of good quality fill. I do not have a loader on my B6200 4x4. I am wondering if a box blade or rear grader blade would be enough to spread the fill from the piles dumped by the tandem...

Little snow today, love it! B6200DT with B2551 blower ***91;youtube***93;HYTi17CMuGU***91;/youtube***93; https://www.youtube-nocookie.com/embed/HYTi17CMuGU