Search results

Congrats on the new machine Stutrac! Bought a GR2120 in 2015 with 35 Hrs on it, had Midstate Tractor in Middletown install a snowblower and snow plow quick connect and joystick control (hydro up and down and electric side to side and up/down chute control for blower, plow is up/down...

Ran a few loads of firewood in, sure makes a difference in this record breaking cold. Stay warm everyone!

WOW! That was GREAT!! Thanks for sharing!

Have a little top handle CS300 been using for small stuff for more than 10 years, still runs strong. The Stihl MS460 is used for bigger stuff.

Wishing you all a healthy, Happy Thanksgiving! Eat, drink and be orange! :D

Don't fix it if it ain't broke. In theory, theory and practice are the same. In practice, they seldom are. Sent from my SM-G900V using Tapatalk

Mystery solved! Thanks for confirming the double secret location of the bypass OBKubota. Don't know why they hide knowledge of this in the manual either. Thanks!

Re: help I stumbled across this, think it was here on OTT, can't find it in search though. There's possibly a bypass valve to release the HST on the GR2100 (not mentioned in the manual), took a quick look for it on my GR2120 last week but haven't located it yet. Hope you find it on your machine.

Using Firefox browser here, don't see many adds... maybe try that...?

Thanks OBKubota. I know, right, that's why the dealer didn't fix it...lol. Well, I learned a little and was able to inspect and clean everything, so it wasn't that bad. Now it's better than new.

So, the top pic. shows the bent lever next to the new one. You can really clean everything up once the seat pan is removed. :D Sent from my SM-G900V using Tapatalk

Sent from my SM-G900V using Tapatalk

Thanks for the suggestions all, got the bota finished up this afternoon. Next weekend I hope to pickup the snowblower. Some shots of the gr apart. Sent from my SM-G900V using Tapatalk

Update: Picked up the WSM for the GR2120 from the dealer. Started the project to replace the hyd lever today. Have the fender all lose and ready to remove except for 2 seemingly simple things: 1. The mower height setting knob, this appears to be pressed on but does not budge with some pretty...

Looks great, that lights up a good size area. Looking forward to adding some, think I'll go to LED headlights to give the small charging system more margin when other LED lights are installed. Thanks for sharing.

That looks like those will help a lot OBKabota, nice job! Need some nighttime pics with those fired up. :)

Hi all, So, went to replace the hydro deck lift lever today. (Bought the mower used, the lever's bent so it hits the deck engage lever). It's keyed and could be easily replaced if the fender had an opening to do so, but, looks like you have to remove the whole fender (seat and all) to move the...

They sure are, it's a great little trailer and setup, better then running the bigger machine across the lawn when it's not needed.

I removed it also, for the time being until/if I figure something out... thanks. So, mowing the hills (as expected) are no problem. The machine is a pleasure to run, no slipping, tire skidding... nothing! Will be adding a quick connect, snowblower and plow for winter. Rodnutrandy... nice...

Thanks for the reply OBKubota, that grass catcher does a nice job with the leaves, thanks for sharing the video. The Johnny bucket looks like a handy addition to your toolbox. Today the orange machine arrived :D, only had a little time to check it out when I got home from work before it got...