Search results

Thank you for your response. I think the GST system is similar in more models of tractors. Do you have a WSM for a tractor similar with GL35 with GST?

I have a Kubota GL35, with GST transmission. The clutch case was broken and I changed it (marked with blue). Also the shaft was chipped (the shaft is marked with red) The shaft was chipped at the end where the circlip 190 is mounted. I made a new channel (a smallest channel) for a smallest...

The command of the 3pt is electrical

Or the ECU orsolenoid don't work

I t I tried to do this, but it not working

Yes, I tried but it don,t move down

The knob is open

Hello, The 3HP is up now. The knob is open, it is positioned on the middle (half) between close and open.

Hello, I have a Kubota GL35 and it don't want to move (up or down) the 3Point hitch. The 3 point hitch remain up. Can you tell me what should I test? and how can I test? What can be wrong? Also, the command of the hydraulic cylinder (which is located on the right side of the tractor)...

Thank you Dave, It's correct, I am from Romania. My Kubota Grand L 35 don't have brake light and now it is mandatory to put brake light. I saw the WSM for Kubota L3130/L3430 and they have the switch. Can you recommend other brake light switches which are suitable for my Kubota? Thanks

I need a part # for brake light switch wich is used in Kubota L3130 or L3430 Thanks

Hello, I need the p/n for Kubota L3130/L3430 break light switch. Please see the attached picture

Any idea? Thank you

Opinions? How can I decontaminate high low valve? How can i verify if it is damaged? How can i repair the high-low valve? Where is located the high low valve? Thank you

Thank you for your response, I don't have the WSM my Kubota, but I found the WSM for other models. It was correct, the rotary valve was put wrong. I rotated the rotary valve and now it's ok. but now, i have other problems: - for Hi speed when I change the gears (from 1 to 8) it have a delay...

Hello, Can you tell me what is the neutral position for (5) 1-2 Shift Pin, (6) 3-4 Shift Pin, and (8)? What are the correct position for (5), (6), (8) when reassembling GST Valve? Also, can you tell me what is the what is the procedure for reassembling the rotary valve (I disassembled the...

I have a Kubota L37 (1993 production) with GST. The clutch died; I bought a new case clutch, plate, o-rings. I dissasambled the clutch, replace the broken pieces and reasambled. Also, when i dissassamble the clutch I** dissambled the GST valve and rotary valve. *I reasembled all and...

The manual for L2900 was useful for kubota GL 29? They are identically? Thank you Ion

have you found a wsm for l2550?

Hi, I have a Kubota GL35 tractor. Now, I have a problem with fuel indicator. Fuel indicator blinks (flashing); it blincks (flashing (indicator on/indicator off)) at 1-2minutes after starting, and it continues to blinks (flash) while the tractor runs. Thank fuel is 1/3 full. What does means...