Search results

You were correct, there was that bolt there and I loosened it and it dropped. Thank you for your help. I knew there had to be a bolt somewhere, but they were all the same color. Thanks again!

Hello, I just installed a new hydraulic pump on my B7100. The old one threads let loose inside the pump and the pressure line wouldn't hold. I have replaced all the "O" rings and copper crush washers. I also installed a new mess screen filter on the suck line. The old one was damaged...

I have an early model B7100 that has this Auxiliary Gear Reduction unit. I have had this tractor for 8 years now and I still know very little about this part of it. When I bought it, the previous owner said it was an auxiliary hydraulic unit, I knew that was wrong. Here is what I know, it...

FIXED IT. It was simple. There was some air or pressure or something stuck in the gear reduction unit. I relieved the pressure on the quick connect ball on the rubber hose, lots of air squirted out and some fluid and it goes up and down just fine now. I went out and mowed off some weeds to...

Wolfman, I am back. I got the correct filter today, I bought all the right o rings and I cleaned everything off reinstalled the o rings in their groves, carefully put it all together and it still is sucking air. The lift is awesome. It has never had this much power before! I hooked my mower...

Well I ordered the wrong new filter, I hate it when you screw up ordering parts. I ordered the one for the Hydrostat version of this tractor. I also ordered all the "O" rings, I will get them tomorrow (since they are so close, ground delivery is same as overnight). The pump was cleaned up...

I wondered about that. I bet I am getting air into the system at the new hose I installed. On the original pump, the threads in the output shaft stripped and broke loose about 2/3 of the way into the pump. You couldn't tighten down the output bolt anymore. The old one has a tear in it and I...

Here is what it looked like before I cut it.

Thanks Wolfman for the advice. I went ahead and cut the suction line, took out a 1/4-1/2 inch, put in the rubber hose and two screw clamps and was able to put it all back together. As of right now, it doesn't leak. The 3 point arms aren't working 100% right. I have added back fluid, but...

Thank you for the picture. I do not have a HST, mine is a gear tractor. I also do not have the flexible splice so, it looks like I may be splicing it and installing one.

Yes the input lines I have a solid pipe. So ours are different. Can you share a pic of yours? Thanks.

I just installed this same pump, I can not get the input line to fit. I see in one of the pictures that they have a screw clamp on a piece of rubber hose on the input line. Can I cut the line and do that? It is just a few millimeters too long. I tried to bend it, but I am not having any...

Re: B7100D Parts-parting out tractor Do you have a hydraulic pump available?

Sorry, it is on my Kubota B7100 I will try those simple things and see what happens. Thanks!

Kubota B7100 I was tilling ground this yesterday and after about 100-125 feet of tilling, I started to lose power and tractor ran rough. I would stop tilling and throttle down, wait a few minutes and all would be fine. I soon noticed that the sediment bowl was about 3/4 to 1/2 full of diesel...

Do you have a picture of this installed on your tractor? Did you have to do lots of modifications to make it work? I am also in the market for a seat for my B7100. Thanks!

This first noticed this problem in October/November. I didn't think much about it at first. I haven't been using my tractor much since it has been so dry, the grass went dormant. I house the tractor inside, 95% of the time. Can I easily open up the steering box and see if the ball nut is...

I am having an issue with steering on my B7100. As you are sitting in the drivers seat, I can turn as sharp as I want to the left, but to the right I can't go very far at all. Nothing is broken, bend or loose in the external steering system. I am the only driver and I haven't hit anything to...

It looked something like this. https://i.ytimg.com/vi/v7GRtlOTIWM/maxresdefault.jpg

I did use something like this, http://www.agrisupply.com/top-hitch-adapter-bracket/p/61369/ mine came with my quick hitch. I can not post a picture right now, photobucket won't let me, without paying a large sum of money to do so. Hope this helps.