Search results

$9500 obo. https://www.bismanonline.com/kubota_l2850d_4x4_w_kubota_bf500_loader_9

I would assume that a B7500 4x4 hydro should have a shut down solenoid to shut it off with the key, worked on one this weekend for my uncle and had to use the manual pull linkage to shut it off. Was just curious if it should shut down electrically or not, didn't take the time to look and see if...

General timing and valve lash question is i have my V2203 torn down and timed the front gearing with appropriate timing marks aligned on all gears and at this point the rear cylinder it as TDC compression stroke. My question is does Kubota start their cylinder numbering from rear as number 1 or...

Let me know what you are looking for and I will let you know if I have it. I took the engine out of an L2850 tractor with 1750 hours on it. The crankshaft broke but a lot of other parts are still available and good. I have had to swap a lot of the external parts from this engine to the new donor...

working on my repower project and not having any luck finding used parts as of now for my donor V2203 engine conversion project. Parts would need to be from an L4350 with a v2203 DI engine. Looking for a "Fuel Cam shaft" complete assembly with front gear that runs the injection pump. If you...

Well here are some teaser pics of the new to me newer version V2203 di engine I got from member cviola for my L2850 engine swap project. For those in question of this project a quick update is I purchased the L2850 with known bad engine for a song and dance price with numerous attatchements...

As the title says I am looking for a good used lower hour running engine for my L2850. Engine model is a V1702DI. If you have one you are willing to part with or know of any available send me a PM please. Thanks Bill

Just acquired a deal too good to pass up. Got an L2850 4x4 shuttle shift 1700 hours with Kubota loader and fairly new tires that is in overall excellent shape except the engine has a bad knock and the front crank seal leaks like a sieve. What put the deal over the top was it came with a John...

Kubota 3561 3pt finish mower help needed I have a 5 foot Kubota 3561 three point finish mower I picked up last year but plans for it fell through so I am going to fix it up a bit and resell it. Can someone who owns one get a picture of the underside of the deck for me please. I looked at mine...

My brother in law wants to upgrade to a more modern FWA tractor that will handle 1600-1800lb round bales with ease. The old 1968 4020 JD is about shot. He is Looking for a used Kubota front wheel assist with a loader. Wants to stay as small as possible the 4020 is too big to get into and clean...

Saw this in Farm Show magazine and though ti was pretty neat. http://fasthaymovers.com/main/?page_id=79 http://fasthaymovers.com/main/

I found a used 5 foot Kubota 3 pt. finish mower model 3561, they are asking $450 and was wondering if it sounds like a good deal to you folks in the know? :) There are a couple pics in the classified add and it looks straight and not beat up just weathered and faded.

Anyone know of a way to tighten the tension on the 3 point lever to keep it in one position. There is no extrenal friction plate to adjust on the lever like most other levers on other equipment have it just goes directly to the rod which goes into the top housing of the tranny diff cover. Mine...

Gun Control. It already has started at Cabela's.... There was a bit of confusion at the Cabela’s Sporting Goods store this morning. When I was ready to pay for my purchases of gun powder and bullets the cashier said..........."Strip down, facing me." Making a mental note to complain to the...

I have read and searched for days on this forum and I find people talking about the drive ratios for specific tractors to find proper tire size. I saw some talk about finding it in the archives here but I have yet to be able to find any charts listing all the tractors and the front to rear...

641 ford tractor with 703 ford loader, bucket is 66 inches wide and 2 feet deep. Tractor has 4 spd tranny, 540 pto "not live" and 3 point, also has adjustable width front axle and adjustable rear wheels. many new parts in recent years. New fuel tank, radiator, water pump ,thermostat, new...

Ok Here is the deal, I acquired a B2150 with an L340 Case loader mounted to it with home made rear vertical post mounts. From another thread it has come to my attention that it should have braces from the rear loader arm mounts to the rear axle. My set up doesn't have any. I need to know how and...

Here are pics of my Recently acquired B2150 HST with custom mounted Case L340 loader with 68" quicktack bucket and 60" Jinma snowblower.

I promised a while back I would get some pics of the L340 Case loader on a B2150 Kubota. The loader has a universal quicktach which I like, it has a rather large bucket 68" which I just installed a new cutting edge on. It will be perfect for snow removal. I am not impressed with the job the...

I have been a farmboy and heavy diesel mechanic for most of my life but one thing about having a subcompact tractor versus a full sized tractor that puzzles me is what is the proper adjustment of the 3rd link? Most full size ag tractors do not have multiple 3rd link mounting height positions...