Search results

I gpt these for $319.00 with the stablizer and couldn't be happier. I don't plan on doing real heavy work but used them to move some logs over to a neighbor and to remove both of my 275 gal. oil tanks do I could built a concrete platform under them. http://www.bucketsolutions.com/

Haven't had to take her out for a couple of days but will report back after I do. Will use the stethascope if I can determine what area the sound is in. Thanks to all for the help

OK ,Thanks . I'll have to get my ear next to the cap and determine it for sure. Good answer!

The sound is a high pitched chirp after the engine is shut down and is off for a little while, maybe three minutes or so. Also will do it one to three times. Sounds like pressure being released by something, much like an air system bleeding off. I tried releasing the pressure on the loader after...

B7200 HST Makes a high pitched squeak when I shut it off. Sounds like something high pressure being released . I can't figure out where its coming from but sounds in the engine compartment or around there. Maybe fluid being released? Does it a few times after shutting down bu tI heard it once...

ALSO: Check the fluid level in the gear box. Top, center.. Probably two plugs with gaskets on the back of it. Top plug is fill , bottom is for draining.

BK and Hair, thanks for the replies. Got the manual and it shows exactly what I needed to know. The two plugs on the back of the gear box are for filling and draining the unit and not for filling and level as I thought. Again guys, thanks for your time and expertise.

I have a parts manual but don't have a service manual and am looking for help on the mmm gear box lube. How much and what weight? It appears to have two fill bolts at the rear of the case and I would think that the top one is for filling and the bottom one is to indicate the correct level but...

http://newlondon.craigslist.org/grd/3768021595.htm On Craigslist

Thanks for the info and pics. Always interested in seeing problems even if it isn't mine in the event I ever need the information.

Are you using the same valve as I am?

jj OVER AT TRACTORSBYNET FIGURED IT OUT FOR ME BUT THANKS ANYWAY

-I installed a Brand control valve on the FEL of myB7200HST as recommended by members here but have something wrong. Everything acts normal except for the "float" position. If I push through the detent position the loader raises up instead of floating. It seems to me if everything else is...

Three rules for buying anything with wheels: never buy used, never lease and never buy a fixer-upper Seems contrary to your posting?

Well the same thing happened to me today.I was removing the 3ft. of snow we got over the weekend and the lever for the up and down motion just flopped sending the bucket upwards. I can control the unit but after looking at the valve assy and seeing the privious owner gooped something up on the...

Hi and thanks for the replys. Guess I'll be taking the valve assy apart when the weather gets better. Kinda thought there was a spring and ball in there but wasn't sure. 37 days till spring and I'm working outside until next year when hopefully I'll have a garage for the Bota. Thanks again.

Hi All, Been lurking since Oct. getting lots of answers to my questions. I have a B7200 HST loader backhoe with a problem or just a question I haven't seen addressed . I understand the fel is supposed to have a float option but when I push mine all the way forward there isn't a noticable indent...