Search results

Well that deal was after 2 other dealers around the area tried to bend me over.

I think the easiest thing for the rops mounted toolbox is just getting a 30 cal ammo can and the taking off the bracket that mounts to the Rops that holds your orange triangle and drill a couple holes in the ammo can and mount it to the bracket that the triangle is supposed to go on you can...

I gave just under $17k for my bx2370-1 last December with 60 inch drive over deck 243 loader rtr1250 tiler 60 inch rear blade Front brush guard and that's tax included hope this helps

We have an x720 Deere with that fitting and tried doing that and it didn't do squat. Plus it gets water in your spindle bearings I found that out after greasing it I saw it purge out water. Your probably better off just pulling the deck off and using a scraper and pressure washer to clean it...

Ok thanks hokie

On my 2370 I bought last year I have never seen the temp gauge light up more than 2 bars is that normal I figured it would light up at least 4 or 5 that would put it about the middle of the gauge I've always been curious about that since I bought it what do you guys think

Yea it's gonna be heavier but how often do you really max out your bx.I'm thinking it's worth the the capacity loss for how versatile it can be. Plus if capacity is an issue just just swap back to your regular bucket. Most of your work is going to be close to the ground where all Your power is...

I happened to come across the cb05 4in1 buckets that land pride in making for the bx yesterdays I thought it was pretty slick was wondering if you guys have seen it and if you have any info on them or pricing was also wondering what guys have been paying for the grapples and 3rd function valve...

LOL small world I'm 15 miles south of Springfield myself yea I just used 18 inch box blade shanks for mine they worked out better than I thought I couldn't believed it pulled all 3 at full depth

Make your own like I did

The one without corrupt idiots In it. O wait there isn't one lol:D

Tractors and guns are my motorcycles and cars I'm an operating engineer by trade so I like playing in the dirt

I'm 26 guess I'm the youngster on here lol

I was meaning they have a cleaner you can buy called radiator flush u can get at any auto parts store you can dump it in with water then run the machine then drain the radiator and block again and see what kind of crap comes out of it but these other guys are suggesting using vinegar and that...

I wonder if your thermostat is sticking closed andhave you tried flushing the whole system

Tried them before with no luck I had to pull the pin and cleanit by hand. If u do get it make sure you hit the plunger square with hammer if you give it a glancing blow that plunger can shoot out across your shop like a rocket betcha can't guess how I know that lol.

Finally done

I played with it yesterday in my neighbors garden she ripped about 9 inches deep with all 3 shanks in one pass with no weight on tractor or ripper .I built the ripper pretty stout she probably weighs 100 lbs or so. the square tubing is 4"x4" for the main tube it's 5/16"wall and the upright is...

Well I've been wanting to build a ripper for a while now so here's a few pics figured I'd do some show and tell.

Ok good that makes me feel better thanks guys.