Search results

Just bought my 2370 last year only has 37 hrs on it and the fuel gauge is 2 bars below full when the tank is completely full anybody else had this issue?

I hope they come out with more info soon im drooling right now. Of course I just bought a 2370 last December I wonder how much it'll cost me to upgrade to an 80 series lol

Coleman equipment has them for $7 http://www.colemanequip.com/Kubota-BX1500-Compact-Tractors-Parts/ I hope this fixes your issue

Change them again u could have algae growing In the tank that stuff plugs filters Like crazy I'd change them filters are cheap and simplest solution

Fuel filters try that

I have a 23 hp bx2370 the shanks are regular 18 inch box blade shanks I got them from agrisupply.com. I can pull all 3 about 8 to 10 inches deep thru our garden last spring in high range I don't recommend that found that out by accident oops lol. I was really suprised in how easy it pulled it...

This the one I built this year if it gives you any ideas for yours it's all 1/4 and 5/16 wall 4x4 inch tube

Yea can't trust Amazon there's to many airheads on there. the only current filters wix makes for the bx is the engine oil filter and fuel filter and only one of those I would trust of those 2 is the engine oil filter. the wix fuel filter has some kind of screen in it instead of a pleated filter...

In that last picture it's kinda hard to tell but is your optic touching the rear sight preventing it from standing up all the way u might try moving your optic foward a notch

Yea I would definitely replace that front site post she looks kinda dinged up. Brownells normally has those they r good to deal with. Also dont forget the arrow on that front site that says up u turn it that direction to make the bullet go up on the target.and if for some crazy reason the a...

Josef is this the standard A frame front site that's pinned to the barrel or is it mounted to a rail or gas block. post a pic will help us out. I've built quite a few ars I've seen a lot of goofy things people have done on ars and blame it on something being bent or broke when they totally have...

I got a quick question for you guys does anybody elses bx 2370 3 point bleeds off while the engine is running of course I have my 50 inch tiller on there and it seems to drop 3 or 4 inches or so in a half hour while I'm running around using the loader.is that normal or should I be calling up the...

Well the forks came in the seem to be very high quality I couldn't manage to break them and already put them to work tearing out the dog pen since we had to put out dog down a few weeks ago and we're going to do some upgrading

Theres no metal fab needed just drill 2 holes in the side of the ammo can and use the 2 carriage bolts that were there to begin with and Bolt it on 5 minutes job if that. I know it sounds like it's going to be flimsy but it really isn't trust me.

Just mount a 30 cal steel ammo can where the slow moving triangle mounts it works perfect and cheap

Loader hands down you can use your ripper teeth on your box blade to loosen the dirt if you need to but you'll get the most work done with the loader just start and one end of your pad dig down 4 inches and work forward from there keeping the same grade and it'll be perfect:)

I guess I'll be the guinea pig I ordered a set today said they'd be here in a couple weeks I'll let's you guys know how the quality is hopefully they aren't junk. Lol

Yes I just bought the 6315 quick attach last week now I just need something to quickly attach to it lol

Have any of you guys purchased or know someone who has bought the Kubota bx pallet forks from everything attachments made by construction attachments they look like good quality but it hard to tell from pictures I would get the Kubota forks but they want an arm and a leg for them or if anybody...

Great minds think alike:)