Search results

Does anyone know anything about the WW Grinder, Super Apache 240C 3-point wood chipper. It is a small unit, but would be good for around the house. I know they came out of whichita KS, but thats about it? Should have never sold my Morebark :mad: This one is on CraigsList $500 ? :confused:

Got my PHD Stand complete, I stole the design from SkylineAcres16 http://www.orangetractortalks.com/forums/showthread.php?t=28369 and a few others I have seen on the web, with a few mods. And of course it is ORANGE, It has a 2' X 4' footprint, and is quite sturdy. Most I have seen are 4 x 4...

Interesting........ https://m.facebook.com/story.php?story_fbid=1423777870989961&id=100000732852071 Not sure what kind of wood this is but it must be a softwood.

Yesterday I picked up a Leinbach Model 7200 Post Hole Auger with a 9" bit. It is in very good shape, $180.00 Missing the A-Frame, but that may be a good thing, as I can design one to be sure I get the lift I need. :D Also missing the Owners Manual, if any one has a lead on one ? :(

I am going to replace the stock 12" long center link mount I need to be able to accommodate a post hole digger, I have two pieces of angle iron that will work, already have the correct holes for the pin. The only question I have is, "how much space is required for a standard post hole...

I'm wondering if anyone out there can provide a good picture and measurements of the holder, top link for a L175 Part number is 99511 - 22140 Circled in the picture below. Unfortunately this item is discontinued, and the salvage yards know it. :mad:

I am wondering if ALL augers for 3-point diggers have the same mounting size / fixture, etc. I found a PHD ($300.00) that is probably too big with the 4' augers for a L1500? Does any one know? Also the 3-point pins are larger than would fit my L1500, but they can be changed. It is an "off"...

I have another post hole digger that I need help ID'ing Owner says he has no idea what make / model it is, all decals are faded? But of course it works great! :D I think it is a Brush Hog, possibly? Model? 9" X 36" auger

Since the first person advertising an Ottawa Farm Super Chief post hole digger and now the Brush Hog, both do not respond? :mad: I digress; why do people post ads and 1. not respond 2. do not delete if sold ? :mad::mad: I am still on the lookout for a post hole digger, and saw this on the...

I am looking at a BrushHog Post Hole Digger and trying to ID the model number, Wondering if anyone can help. I have looked on-line at parts manuals but none seem to look like this one exactly? The part where the 3-point bolts to the boom is never like this one on any of the diagrams. Any idea...

I am wondering if any one has done the conversion to get rid of the old external regulator on a L175 or 1500 or similar? I think I have the wiring figured out, but maybe someone well versed in auto electrics can confirm. The following is the stock wiring with regulator; And this is what I...

Well I think this project is coming to an end, I am still awaiting a lead on Japanese Decals (I know he is busy now, fingers crossed) or I will have to go with the L175 US equivalents and I need a stock rear view mirror. All in all things went pretty smooth considering the condition when I got...

I am wondering if this setup is too big for a 1500DT Found it sitting idle, owner not around to ask if he wants to sell? It is a Brantly Manufacturing Company MD-8 (8' Back Hoe). This is the information I have found..... Kubota Applications and Notes; Specifications; I think I know...

It is true that on all Kubotas (L1500 / 175) that the oil pressure sending unit threads are BSP or BSPT? If that is the case is this the correct adapter? 1/8-27 NPT Female to 1/8 28 BSPT BSP Male Gauge Sensor Sender Adapter Reducer...

Has anyone installed a water temp gauge? Where do you plumb the bulb? I saw the thread for the oil pressure?

Ahh Mowing.... Mowing is a good way to clear your mind of crap going on in your life, by your self, just the rattle tat tat of the engine, the smell of fresh cut grass, the ping ping of the occasional rock. Whether its a job, medical, money, relationship, or heaven forbid an IRS problem...

I have my loader off, disassembled, getting painted, replacing the controls, Etc. I have seen on other forums two schools of thought one that these are self bleeding, another that you need to bleed them when you have this much air in your system. Any thoughts, experience on this subject?

Not sure if this will take off, but I have four different implements that will need some serious attention. So I am going to start this thread, if only as my soapbox:) I am close to finishing my L1500DT rebuild, and turning my attention to, first my front end loader (FEL). Soon to follow...

This is a general newbie to thermosiphon cooling systems question. While doing some mowing today I noticed there was a little bit of coolant coming out of the overflow / whistle. The whistle never actually whistled. I rode her back up towards the shop put a large towel over the radiator cap...

I got a new (used) COVER CYLINDER ASSEMBLY Thursday from WKTP, painted it and installed it today. I was hoping it would fix the "all or nothing" lowering of the three point. As it never worked from the get go, I had / have no idea what to expect. It did help, I can "feather" it and it will...