Search results

I appreciate all the replies. I wish I had done a little more homework before I bought the B219 FEL. But I had only had my B7100HST for a couple of months when a B7100 popped up on Facebook Marketplace with a B219 FEL and a rod through the side of the engine block. I thought I can always use the...

Thank you 007kubotaguy for the reply. I will look for those chain links and try to get the rest of it apart. I wish that I could have the loader and the belly mower both on the tractor at the same time. But I don't think it will work to have the frame work for both implements bolted to the...

Hi all. I have a B7100HST with the RC60 belly mower. I was looking for a FEL for it. I found a B7100 non HST with FEL and a rod through the engine block. Then after researching my impulse buy I discovered that the HST and non HST have a slightly different wheelbase so I will need to do a little...

Thank you for your reply it is really appreciated.

The tractor shows 1530 hours and the hour meter does seem to work. It clicks as long as the key is on. The return linkage is not adjusted properly. Thank you for that tip. With the trailer hitch on the 3 point hitch the top arm comes up and hits the back of the seat before the rc60 belly mower...

I recently bought a hitch reciever for the 3 point hitch on the back of my B7100hst. I slid a ball mount into the reciever with a 2" ball. I have a 16 foot dovetail car hauler that was empty and I needed to move it. I backed up under the hitch and the hydraulics wouldn't lift the trailer tongue...

I just drove 3 hrs one way to pick up a ROPS for my B7100HST. Does anyone know what size the 6 bolts are to hold it on? I cleaned out the holes (it has never had one) but I can't figure out the size or the thread pitch or even if it is SAE or metric. I have some old mopar head bolts that are...

Hello fellows. I have had my B7100HST with the RC60 belly mower since June. I have been looking for a front loader for it and found a B6100 with the B219 loader. The 6100 is gear driven and has a rod through the side of the block. The poor tractor has led a very rough life and looks to have been...

Thank you all for the replies. I will certainly use the diagram and crawl under there to investigate that bearing. It does seem the parking brake is gonna be my best friend. The floor to my garage is sloped slightly and it will not set with the engine off without setting the park brake. It ever...

Hello and thanks for adding me to the forum. I just bought a 1993 B7100 hst. The tractor is in great condition with only 1033 hrs on it. I replaced the oil and filter, hydraulic oil and filter, front axle gear oil, new antifreeze, new air filter and fuel filter. I cleaned the treadle pedal...