Search results

I'm sure some of you fellow farmers have dealt with many types of hvac units, especially thoes with rental properties... anyone ever run into the issue with a heat pump (specifically daikin) having a board failure and will always ramp down to idle a few mins after starting and just stay at...

I'm not sure what it means and how to fix it but my tractor was working fine, just started it again on this cold day and I get this error as well as the symbol for regen with a ! Across it as well as a countdown timer. It's odd because that last part usually refers to low DEF but it's full...

Anyone know how to adjust the amount of play/dead zone on a kubota loader joystick? I'm guessing there is a way to get rid of the cable slack? My bucket tilt is fine but the up and down is a huge dead zone. I was actually plowing snow earlier and wherever keeps it tensioned slipped again so...

So I have 2 engines, ones a small honda in a pump house I built and ones by 10kw gas generator for my minihome that is setup in my shed. Having the door to the shed open in a blizzard or hurricane for the generator dosen't seem like a great idea. Other one is a water pump that needs to run early...

So we put a brand new honda engine on our strawberry weeder and for some reason it's all outta wack. Blows black smoke, no power, back fires... the only thing I did was loosen the fuel bowl enough to drain the fuel and tighten it back. The gas went rotten in the time it was sitting in our shop...

we have a 2355 and a 2350 along with other tractors but these two are very similar. Out of the blue without warning the 2355 lost 99% of hydraulics, steering still works but 3 point and auxiliary hydraulics are just little rhythmic pulses barely doing anything. I drained the fluid and it was...

Is there a video or guide as how to setup and use the dual rpm memory feature? I ready about it in the manual and what it says to do does nothing. I can push and how thoes 2 buttons a million times and nothing happens. Am I missing something? No beeps or anything, it's like the two bottoms for...

So my m5n-091 works great! Except when we're spraying our side hill orchard as the tilt causes it to run out of fuel with even a nearly full tank. Pickup is on the right tank so left lean is a no go. I wonder if you could put an inline filter that was empty to act like a tiny fuel tank for the...

Anyone else have this kind of experience yet this year? Haha also It fell in a ditch we had there about 6 months ago so still soft.

So on the farm we somtimes burn out a jet pump here and there, usually the shaft seals. Only recently realized they can be fixed and reserected one of the old burcam ones. It works great but has a feature I don't understand. If it runs for a long duration it will randomly just shut off, not...

Not sure if theres any other greenhouse growers on here but one thing we always had issues with is the little motors that open the vents/loovers. They are an ac motor that has tons of little gears and they push open the vents but when powers cut a spring makes the motor retract. They hum and...

So I'm learning to tig which sofar is going fairly ok....on steel. I hooked a tig torch with a valve to our stick welder which is a lincon 250 transformer based welder. Steel goes great I get nice smooth welds and I'm happy except for one thing... my tungsten keeps melting even though my...

I'm really curious if anyone else has to do this but our current orchard tractor is the m5n-091, last one was a deere 5083en that fell apart. But we have narrow tractors to fit down the orchard rows because the limbs hang out. But were on a hill so some of our orchards are really tilted like...

We have an old new holland ts100, built like a tank frame wise and like a toy car in the rest but we manage. Recently when you shift into reverse after having a big push like scooping up a load or somthing it will start to roll then clunk. Still works but this clunk in the rear end is...

I'm one of thoes people who gets alot of sinus headaches that border on migranes. Bad smell? Massive headache... Weather pressure change? Massive headache.... Bend over alot.... you get the gist. So I basically live on excedrine but then you can get reflex headaches but I get the headaches...

Also stainless steel or brass? Stainless is like 1/3 cheaper. My opinion is a ball valve, they trap water and can split on the side but this crack only leaks when opening or closing the valve. It does not leak in normal operation. You may wonder why I would choose this valve. For me gate...

Ok Idk if I'm screwing up or if my dads van connections are bad but he needs me to get the lights on one of his boat trailers working. Should be fairly easy, they are very dim and acting odd, clean up grounds and still dim. Ohh he ran the battery dead testing ok so fix that.... solid tail lights...

Just a curiosity questions, my new m5n-091 is great but if it's at 1/4 of a tank of fuel or less it will run out of fuel when tilted left. Not a big deal but is this a common kubota thing?

My one deere tractor appears to have the stream of bubbles sign of a bad head gasket thing going on. But with no other symptoms such as white smoke or cross contamination so I'm not sure. Anyone know if the head gasket repair stuff actually works for small leaks? Or am I doomed to a 10k repair...

We left one our water pumps to a friend last fall for an emergency as his frost pump sheared the shaft off. Diesel engine and he had to almost full throttle it to do the job as it's not a high pressure pump and he needed high pressure. It had to run like this for days in end but survived and...