Search results

At the very least, disconnect the battery, until you find the cause.

Pau7220, thanks for the info. Hopefully I never need it, but just in case.

Pau7220, please explain why the different pricing between the 2.

Henro, sell something you don,t need or haven,t used in a long time, to someone willing to buy it at a ridiculous price, and use the huge profit from that to buy what you do want, and need, right now. Lots of folks out there, that will buy stuff at crazy high prices, you just have to offer up...

Before actually making any adjustments, make sure you are pressing the brake peddle as hard as you can, before engaging the brake lock. Maybe you weren,t fully engaging the brakes, which allow you to move the tractor. Like others on here have stated, you should be able to hear your tractor...

To help you properly line up the splices, get some permanent white marker, put the splines together, and then draw a line on both pieces while they are together. In my world, I like to use the kiss theory, keep it simple, sweetheart.

Not a great idea to keep banging on the throttle lever to get it to move. There are adjustments you can make very easily, to be able to use the throttle lever as it was designed, and intended. You don,t have to take the dash off to make the proper adjustment. Remove the cowling under the...

By any chance, do you own a Harley that might have been parked in the same spot some other time ?

We up here in Canada having been getting $crewed royally since our country decided to switch to metric. All the quantities got down-sized, but the prices either stayed the same, or went higher.

My experience is yes, it is slipping. My BX2360 was put together with much better quality than my BX2370. When I mentioned to the salesman that the welding area on my hood were the underside brackets attach was very poorly finished, he just shrugged his shoulders, and said, he had seen much...

I have found that mine only works when I rotate the height knob clockwise, while sitting on the tractor. If you miss the height you want to set it at, you have to rotate clockwise to get it where you want it.

A friend of mine bought a Kubota BX2380, without the mower, but with a front mount snowblower, and his tractor did come with the arms required to lift the mid mount lawnmower. Maybe a quik call to Messicks or your local dealer could confirm the info you are looking for. Also the buyer should be...

Yup, I found that out on my mower assembly as well. What I did is line them up before installing the mower, and then marking them with a white paint marker, to show where the splines have to be aligned so they will slip together easily, without the frustration of trying 50 positions first.

If you are getting a vibration, one of the shafts are bent. Figure out which one it is, and replace it with a new one.

Good info.

I would not recommend slamming it, and would never do that, even with someone elses equipment. For the amount that actually sticks to the bucket while using it, why not leave it there, until the job is complete. Then use a scraper and snowbrush, to remove whatever is stuck, before moving the...

A question for the OP, where are you located, and what general area is the machine located near ?

I do, but only once it is already on the ground. Until the weather network starts getting yesterdays forecast correct, it is really hard to believe in tomorrows forecast.

Did it come apart when you lifted the blower to its maximum height ? If so, re-check your installation manual, and make the proper adjustments to the correct length stated in the manual. Again, make 100% sure your main shaft isn,t bent, from flailing around when it let loose.

Sounds to me like an assembly error on the dealerships part. Do not use the blower again, until the dealer gets a chance to look at it, and correct the assembly error they made. Make sure they check that the main shaft going from the mid pto to the front didn,t get bent from flailing around ...