Search results

Hey guys, what should the working operating temp of the coolant be and what should the oil pressure be on my B6000, I'm installing gauges. Just wondering, my service manual does not say. Thanks.

Hi guys, I have a TG1860G, the hydrostatic seems to be whining and seems not to be as fast as it was when I got it. I think it needs fluid. manual says it takes 3.5L or 20w50, Its a sealed unit,the tg1860 diesel has a dip stick, mine does not. how to I check or add the fluid? add it from the...

I am always cautious with my loader, I know what kinda of trouble I can get into if its overloaded or up to high. One thing I learned quickly, once I get my material in the bucket, I lower it to the ground and travel with it down.

im thinking about a 20A toggle switch with a built in led that turns on when the switch is on.

Hey guys, I want to wire a Glow plug switch with a on indicator light. on my B6000, I know the voltage to the glow plugs is 10v, would it make any differance if they get 12v, is it safe to heat them up at 12v? or are the specificly made for 10v, I always thought glow plugs were either 6v or...

yeah, I did download the manual for my tractor, shows nothing on how to test a dynamo or a rectifier, its a horrible service manual.

I dont think my B6000 charges. I have 11v`s at my battery when the tractor is running and does not go up at all, even when I give it gas, there are 3 leads off the dynamo. 2 go to the light switch and one to the rectifier, what does the rectifer do exactly? what should I be testing. Thanks.

took my injectors in today to the kubota dealer, he tested both of them and called me with the results. He said that one wont hold pressure past 300psi, and the 2nd one goes up to 1900psi but it loses pressure. I asked if I can just replace the one thats 300psi, he said its not a good Idea and...

I think it may be the injectors, I removed them today, and found that the part that sits in the block is soaked in fuel, not sure if thats normal or not. Going to take them to a diesel shop to have them checked this week.

never thought about that, it does not sound like its backfireing. What still throws me off is when the engine is warm/hot, it fires right up. now im not sure what route to take first. have the head machined or have the injectors checked out.

Hi Apogee, thanks for the reply I do have 10v`s at the glow plugs, I replaced them not more than a year ago. Im thinking its a injector problem. I may have to pull them and have them tested at a diesel shop. What exactly do they rebuild on the injector? the nozzel cap? a new Injector assy at...

Hi guys, I recently re ringed my B6000 due to low compression figuring it would fix my hard starts. I re ringed it and now my compression goes to about 400psi cranking it a few times. But its still very hard to start, takes a lot of turning over to get going, lots of white smoke on start up...

thanks, I used a hone and then they came out, only after I pulled the engine! what a pita....

Hey guys im in the process of re ringing my B6000. leaving the engine in, journals and liners look very good. problem is I cant get these pistons to pop up?!? they slide up and down fine but I cant force them up out of the block? am I missing something here? any tricks to this? Im hitting...

Hi guys, Im in the process of re ringing my B6000. I have a service manual, But I cant believe how crappy it is. gives no torque values at all, well for the head bolts it does but nothing more. does anyone know what the torque of the connecting rods should be? and what the clearances should...

Hey guys Im going to start ordering parts for my old B6000 has low compression, and is difficult to start. I checked a lot of part #s on messicks piston rings, head gasket and find I can get them. Question is what gaskets to I need. Im just re ringing it.

hey guys I got a 98 TG1860g for a good price, my question is about the hydrostatic on this. when go forward and let off the pedal it still goes forward at pretty good pace. Should it come to a complete stop when I let off the pedal or is it normal to keep going till I go "back" then it stops...

Hey Mike, what control valve did you use from John Deere, I want to retro fit power steering to my b6000. From what I see, John deere control vavles have wierd connections at the control valve that are held down with some sort of plate.

anyone else find it strange that this site would have a massey ferguson ad on it? just find it weird thats all...

got it from the seller dbelectrical was 85.00