Search results

yeah I put new ones in right away, still didnt make a differance for me. My engine just wasnt spinning fast enough to build up compression to fire.

Hey guys, just wanted to post for the records on my hard start issue, I had my B6000 over a year now, and it has always been hard to start. Would take along time to crank over and at times I would even have to shoot starting fluid down the breather to get it spinning fast enough to fire up. I...

it can dig very well, I have a B6000 with one of these tooth bars and Im amazed how well it can dig a hole. My property is mostly clay as well.

I dont really see the indicator on my B6000 as well, I replaced the indicator coil, still you can only see it in the dark get red. Just check the voltage at the glow plug when turning the glow plug knob, make sure you have voltage there.

Bulldog what make of oil do you use for the 5w30 sythetic? I want to switch but not sure what sythetic to get for my little B6000

I just replaced them and the glow plug indicator. Im getting 10v at the glow plugs.

Hey guys, my B6000 is extreamly hard to start when cold, I turn on the glow plugs for over a min, put the throtle up and try and start it. I get lots of white smoke but she just wont fire up. when I shoot starting fluid in the air breather it will start up and run good. Can it be its not...

thats what I need the ones in #2 link, anyone know the NGK part # for that plug?

I bought the tractor a couple months ago and just fixing her up. the new ones I got from messiks are much 2 long, and would hit the top of the piston. Im gonna pull the originals out again and head over to the kubota dealer.

so everyone tells me the replacement NGK glow plug for my kubota is Y107-1 and thats what messiks sent me. the ones I took out of my kubota says NGK 8674 I cant seem to find that # anywhere. wonder what I should do now, does NGK have a chart to compare sizes or something? Thanks.

Hi guys, I got a pair of new glow plugs for my B6000 from messiks. They are about a inch longer than the ones that are in there now..... does the length matter? how much clearance is in there?

Hi guys, just wondering what way this bearing goes on. Im guessing the flat part goes against the pressure plate, that would mean the entire housing turns, but what gets pressed on the center black ring or the top cover ring as they all turn.

Thanks todd will pay special attention to the way it goes on. Its possible the previous owner put it on wrong as well since he said the clutch is new.

Hi guys, well my new to me B6000 has a failed clutch, I believe the presure plate is shot, my clutch peddal has no resistance, and I cant shift. I just ordered a new pressure plate, clutch, release bearing , and pilot bearing. This seems prety straight forward, the only question I really have is...

the loader uses the trans oil, no reservoir. Jay.

Hi Guys, I cant make up my mind on my B6000, I bought it a month ago and would like to change the transmissoin oil, should I use 80w90 or UDT. I have a front end loader on it. I cant find the answers in the search. Thanks. Jay.

ok thanks freewhel wil pick up a pail of it tonight.

Im new to my B6000 and I am changing up all the fluids, manual says SAE 80 Gear oil, I see in the store they have 80w90 gear oil. Is that the same thing?

Hey guys, ever since I got my B6000 I disliked the front end loader control valve, its a homemade "joystick" valve, I would like to buy a nice replacement. I have a couple questions, how do I know if my system is "open" or "closed" also, whats the "float" I tried researching I cant find no...

Hi guys, I have a B6000 and I need to change the front tires. I have a old pair of Carlisle tires on there that are no longer available , the size on there now is 22x7.5 -12 what ranges would fit on that rim?