What did you do to or on your Kubota today?

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,400
2,322
113
Virginia
A little coolant drain n fill on the L today. Super easy with the Schwaben vacuum tool!
20240407_121304.jpg
 
  • Like
Reactions: 5 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,256
4,883
113
NW Montana
A little coolant drain n fill on the L today. Super easy with the Schwaben vacuum tool!
View attachment 125819
Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way. :)
 
  • Like
Reactions: 1 users

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,400
2,322
113
Virginia
Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way. :)
I wish they would! Lol!
I still pulled the lower radiator hose to fully drain the system. Even then, about a pint came out of the tool exhaust port.
 
  • Like
Reactions: 1 user

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,289
902
113
West Mansfield, OH
Mowed with the B1700 and gathered up all the corn plant debris from the ditch with the B3200. Time for lunch and then to wash the mud off them IMG_2122.jpeg IMG_2121.jpeg
 
  • Like
Reactions: 3 users

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, (BX sold)
Sep 13, 2021
2,006
2,219
113
Ohio
Well, I don’t plan to drive under it again. The top is done. I worked on it until I got the folded over portion of the trunk folded in half. I ran out of focus and go-go juice at same time so I stopped for the day. 🥃
 

Attachments

  • Like
Reactions: 8 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,256
4,883
113
NW Montana
I wish they would! Lol!
I still pulled the lower radiator hose to fully drain the system. Even then, about a pint came out of the tool exhaust port.
Some friends bought me a $100 gift certificate from the local Kubota dealership so I'll be picking up a couple of gallons of Kubota coolant this week. With any luck I'll be changing the coolant in the MX this weekend, or next week at the latest. The M will be due for a change in the next month or so as well.
 
  • Like
Reactions: 1 user

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,400
2,322
113
Virginia
Some friends bought me a $100 gift certificate from the local Kubota dealership so I'll be picking up a couple of gallons of Kubota coolant this week. With any luck I'll be changing the coolant in the MX this weekend, or next week at the latest. The M will be due for a change in the next month or so as well.
I'll be interested to know how much the MX takes. My little L calls for 6 quarts but it only took a gallon. To be honest, I did not look for a drain on the block. Working on a lot of Ford trucks, I know a good bit will hide in there. But, like my vehicles, I stay on top of maintenance. So if another 2 quarts are in the block then I'm not worried about it.
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,256
4,883
113
NW Montana
I'll be interested to know how much the MX takes. My little L calls for 6 quarts but it only took a gallon. To be honest, I did not look for a drain on the block. Working on a lot of Ford trucks, I know a good bit will hide in there. But, like my vehicles, I stay on top of maintenance. So if another 2 quarts are in the block then I'm not worried about it.
The spec sheets states 6.9 quarts which is surprisingly low. The M holds 8.5 quarts supposedly. I stopped by the dealer this morning and had forgotten that they don't stock Kubota engine coolant. They sell NAPA premixed which is the same thing according to the parts and service counter.
 

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,400
2,322
113
Virginia
The spec sheets states 6.9 quarts which is surprisingly low. The M holds 8.5 quarts supposedly. I stopped by the dealer this morning and had forgotten that they don't stock Kubota engine coolant. They sell NAPA premixed which is the same thing according to the parts and service counter.
Probably the same as Asian Green. Not to be confused with Soylent Green. I was going to switch to this, but didn't want to mix and didn't have time to flush it several times.
 
  • Like
Reactions: 1 user

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, (BX sold)
Sep 13, 2021
2,006
2,219
113
Ohio
Took the little girl for a stroll in the afternoon moonlight…sort of….i mowed for first time this year and in totality(we had an eclipse here.)

The pups were just happy to have extra shade. 🥃
 

Attachments

Last edited:
  • Like
Reactions: 10 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,256
4,883
113
NW Montana
Probably the same as Asian Green. Not to be confused with Soylent Green. I was going to switch to this, but didn't want to mix and didn't have time to flush it several times.
This is the stuff that the local Kubota dealer sells. NAPA had some stipulations re pricing, and so it's $13.99 a gallon at the dealership.


napa_coolant.jpg
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,893
3,248
113
Wind Gap, PA
day one of two day sewer line replacement...

Dig:
H4-BEL698-1.JPG

H4-BEL698-3.JPG

H4-BEL698-2.JPG


Eclipse...and digging under the eave of the roof was all that much fun.

H4-BEL698-6.JPG


backfill/rough grade...will smooth it off tomorrow..

H4-BEL698-8.JPG


and the best shot of the day...my friend's son loading me up withy another load of stone... :ROFLMAO:

H4-BEL698-10.JPG


back at it tomorrow to finish connection at the street/alley
 
  • Like
  • Love
Reactions: 13 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,256
4,883
113
NW Montana
day one of two day sewer line replacement...

Dig:
View attachment 125945
View attachment 125946
View attachment 125947

Eclipse...and digging under the eave of the roof was all that much fun.

View attachment 125949

backfill/rough grade...will smooth it off tomorrow..

View attachment 125950

and the best shot of the day...my friend's son loading me up withy another load of stone... :ROFLMAO:

View attachment 125951

back at it tomorrow to finish connection at the street/alley
I like that "stone" on the house, if it is in fact stone. Maybe it's a stone veneer. Nice project.
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
5,229
3,871
113
North East CT
I spent the day using the landscape rake pulling rocks out of the backyard, and filling in the depressions in the backyard with the rocks that I was picking up. Then found some fill to cover over the holes, but not enough to blend it into the rest of the yard. It was a very long tiring day, and to top it off, I got a flat tire on the way back to putting the tractor away. Small piece of metal like a piece of a paper clip or a thumbtack. Tomorrow I will see if I can get it plugged or a patch put on the inside. It is a front tire, and they are so small that it makes them difficult to dismount and remount.
 

RichardAaronlx2610

Well-known member

Equipment
Lx2610 Cab, Fel, Backhoe, Grapple, Box Grader, Forks
Aug 3, 2021
426
475
63
New Jersey
Nice! I meant to thank you for the link to the Schwaben vacuum tool that you posted in another thread. I did in fact order one as I said I would. I hope that ECS Tuning is sending you some kickbacks for sending traffic their way. :)
Ahhh. Ecs tuning. That brings me back to my Volkswagen days
 
  • Like
Reactions: 1 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,541
3,625
113
Central Piedmont, NC
Had an apple tree damaged in a storm over the winter that was messed up enough we finished it off. That left a stump I didn’t care to mow over or around, so ground it out. While the stump grinder was on, drove up the trail through the woods we widened a few days ago and knocked out the dozen or so small stumps that were in the trail. Could have left them but IMO it’s nicer without them.
IMG_2161.jpeg
IMG_2164.jpeg
 
  • Like
Reactions: 12 users

ayak

Well-known member
Lifetime Member

Equipment
L3301 HST
Feb 16, 2018
576
747
93
WV
Finally got that gate up, so Evil Twin can’t bring his Box Blade back 🤣
IMG_8562.jpeg
 
  • Like
  • Haha
Reactions: 7 users