Recent content by Turfturd

Yes… just like North Idaho Wolfman said the “feedback linkage”, that is what I was referring to. I just didn’t know what it was called. Thank you.

When I got my B7510 it had a belly mower attached. The mower hooked to the 3 point to raise and lower. The mower would not raise or lower. It sounds like the same issue that I had. There is a small rod that follows the 3 point arms. It has a spring on it that is adjustable and it adjusts how...

The wheel weights helped a bunch with stability on slopes. I also have a set of forks that I use to move stuff around. I do use it mostly on hard pavement but some dirt/mud work.

I have a total of 300 lbs of wheel weights on the rear and I have a box blade attached during loader operation. Thanks for the reply.

Yeah I have found some r4s that are the same size. I am just not sure about the total circumference being equal. Thank you

I have been doing a lot of loader work with my Kubota B7510. My concern is, I bought R1 (or as I know em as agg. tires) for it and the max pressure says 22psi. Well the front tires sag/squat very bad at that pressure. I am considering replacing them with some R4’s for more sidewall strength...

Wow that looks pretty good. Thank you for that. That is a great idea. Now my brain is really smokin.

Has anyone ever changed out the pins on their FEL with pins that have handles on them. I am trying to make it easier to remove and install them. I am in the process of making a frame for some pallet forks and I was thinking this would make it easier to swap from bucket to forks. I know about all...

Yeah you are correct. I worked for a local school district and they switched all of ours with the same conclusion. The funny was they said it would pay for itself in 3 years. But before 3 years go by they changed them again. The contractors made out like bandits. All things considered I think...

I had the 4 foot fixtures already so I just bought the 4 foot LED replacement bulbs. I like the ones that you can wire direct from one end. You just eliminate the ballast all together. I got them at Home Depot. You just use the old fixture and the “tombstones” to hold the bulb.

Yeah…..kinda what I thought. I do like the LED ones, they even work better in the cold. And messing with the ballasts gets annoying. I do feel like I am at a greater risk of dying in a car crash on the way to the recycler’s place than dying from mercury vapor poisoning. LOL Thanks guys

I was working in my shop the other day and noticed it was not as bright as it used to be. Of course there were some bulbs out. So I decided to install some new ones. This is where it gets interesting. I have the 2 bulb 4 ft fluorescent fixtures fastened end to end on the trusses. Over the years...

I had the same problem with my MMM. I have a B7510 and I could not keep the mower deck at a consistent height. I ended up using some heavy duty chain and clevises that hooked from the mower deck to the tractor frame. I adjusted the links for the HOC that I wanted. It seem to work for now.

When you run it like that does the seat blow up and then bang back down when you stop? I have always wondered about backing on but I always think about the seat bouncing back and forth.

Yep