Recent content by RichAllyn

Looking advice where and what price I can get 2" rear wheel spacers for my BX23s. Thank you

Sorry about that I meant to say hydraulic filter not oil. My mower is RCK60B23BX. Yes a 60 inch. Do you know of anything negative about the relocation filters new location when done. I am ready to make this change just want to ask everything first. Thank you for your help.

Yes I do have a MMM. Are you suggesting both fuel filters and the oil filter? At 72 I am in pretty good shape to get down under the tractor, but why not make it easier.

I am approaching 200 hours on my bx23s. The 50 hour change was made by the dealer. I am looking for suggestions in relocating filters and install wheel spacers. Opinions and recommended suppliers will help me get this done so I can do it myself. Thank you

If I did this right there should be two pictures of what I am talking about with this dolly. Also seems strange that the post is not centered along the frame. I think the backhoe bucket must go over this?

The one that I bought last winter has a 1 x 3 inch post coming up from the frame. Ones that I seen in videos don't have this post. This comes with no directions. Anyone know about this post.

I have raised the 3 PT all the way up several times. I will look at the nut tomorrow that you mentioned and see if an adjustment will work on this. The ops manual, tractor or mower manual?

This is my first spring to cut grass with this new bx23s. I'm having a hard time turning this dial. Talk to the dealer and was told to keep working the control lever to free the dial up. Also he said it will get better once broke in. I'm sure this is something lots of people have no problem with...

Thanks I will try that in the morning.

The p1000 was a mistake sorry

I am trying to attach my mmm 60 inch mower for the first time on my bx23s. A instruction video told me to set the deck adjustment to 0. I turned the dial in my picture and it stopped turning on 4. I have tried to free it up and it will not move so I am missing something. I do not have a mower...

The forks are new and like you said the controls can jump real easy. I worked at DuPont for years and did a lot of forktruck work. I agree there is big difference. If there is no load on forks or a loader is it ok to curl at low RPMs?

Thank you for your comments. I wanted hear from someone who had experience with the forks to give me confidence to set it up for them also. I also like what you mentioned about a design to show level at any height. Thanks again

I am soon going to install a home made leveling guide. Still looking at different designs and trying to decide which one to go with. Originally this was for my FEL. Will this also work to help out using forks? Thanks