Recent content by Redtoorange

https://c1.a2109.com/kubota/6c20/6c2000/6c20008412.png. part 50 moves back and forth along part 70 and I don’t think that it should based on the diagram part 40 should keep it from moving laterally. I am reluctant to pull it apart as I am no mechanic

One of the first things i did was disconnect and reconnect the loop connection. While it was disconnected I made sure the pressure was released. I can see the loop hose jerk when I activate the loader so I know the loop is connected. A couple of months ago I replaced the left lift arm and I must...

One of my circlips came off my 3 pt lift arms and popped the spline shaft seal out, draining the UDT. I replaced the circlip and refilled the reservoir but the 3 pt does not work. There is no resistance manually lifting the 3 pt and regardless of the lever position it drops immediately when i...

You can also get magnetic block heaters that are electric, stick it to the oil pan. Sent from my iPad using Tapatalk

In the long run I would like to fab a roller guide. Sent from my iPad using Tapatalk

After reading a thread about the LA532 FEL stripping the covering off the lines from rubbing I went out and checked mine. Sure enough, less then 50 hours and it was almost through the rubber. I cut a 5" length of 1/2 copper pipe split it lengthwise and crimped it over offending part of the...

When I bought my 2650 the dealer said the number is how many KG it will lift so conversion at 2.2 pounds to a Kilo would put you at 990. Sent from my iPad using Tapatalk

Sorry, you did a great job. Just noticed the end of the thread. Sent from my iPad using Tapatalk

Try reversing up the hill with bb and then pulling the dirt straight down to build at the bottom and knock down at the top that way you are always facing down hill and gravity will work with you? Once you have knock the grade down a bit you can do side to side. Sent from my iPad using Tapatalk

I use my bb then landscape rake, I have to pull the 3/4 " rock out of the grass in the spring and the rake works great. It also gets rid of the leaves and branches off the lawn. Sent from my iPad using Tapatalk

Beautiful scenery, nice place for a bike trail. Sent from my iPad using Tapatalk

If you're asking what float means, it means the bucket is allowed to follow the contours of the ground with minimal down pressure (bucket can move up and down without you touching the lever) Sent from my iPad using Tapatalk

I like to use my box blade for when it is really messed up then a landscape rake (rock rake) for when it is less messed up and to pull the gravel back off the lawn from winter. Sent from my iPad using Tapatalk

Man o man there are some talented people on this site. You do better work then most factories. Sent from my iPad using Tapatalk

Came assembled from the dealer when I bought my x500 I got them to throw in the trailer. Course that doesn't mean it is done right. Sent from my iPad using Tapatalk