Recent content by lheward01

Thanks for the advise, we cleaned up the valve and when testing the cylinder came apart. It looks like the piston came unscrewed some how from the shaft. I will take it to a shop and get the cylinder rebuilt.

I have a b2150 with a woods 750 back hoe. I was doing some digging over the weekend putting in a culvert. I dug a trench about 80 feet long and the hoe worked fine, I then moved some dirt to cover the culvert and when leveling it out I noted the bucket on my back hoe drug the ground a couple of...

Thank you.

I do not think I have an adjustable lever stop and I am not sure what you are referring to as the quadrant.

Great advise. I tried to get the lever off and put a new wave washer on but it is really stuck, I was however able to tighten up the nut and snug up the lever. It will work for now. Thanks for the help.

Correct, it will the 3 point will stay at any point where I hold the lever. It seems as if there should be some friction disc or something to keep it where it is placed. Not sure if this is the case.

I don not know what those are. It has lever just to the right of the seat, the lever moves inside of a arched bracket. It does not have resting spots. Its kind of like the infinite wind shield wiper delay on your car. Sorry this is the best way I know of how to explain it. The lever moves...

It will only stay in the all the way down or all the way up position. What is involved in fixing the detent?

I have a B2150, my back blade will not stay in the middle position, it drops. It will say all the way down or all the way up just not in the middle position. Any ideas for the fix?

Thanks, I took the cap off the end an did find some water in it. Seems to have fixed it.

Great, I will try that first. Thank you.

Thank you, the only one I found new was $1600. I have only one lever to operate the bucket in all directions so I am not sure what you are referring to as the 2 lever model.

I have a b2150 with a LA350 loader. This is my first winter with the tractor and I noticed that when the temperature gets below freezing the valve freezes and prevents the bucket from lifting. If I let the tractor run at a high idle for 45 min or so it "thaws" out and starts working. Also...

I have a pair of rims for sale. I purchased these from E-bay and I mis-read the ad and they do not fit my B2150. I am asking $100.00 for the pair as this is what I have into them. If interested please contact me, my e-mail is lonnieh@accurateapprasie.com. The info on the wheels are from the...

I have a b2150 with ag tires on it, I am looking to change to R4s or turf tires. If you have something or want to trade please contact me at lonnieh@accurateappraise.com. I am in Holly MI. 11/22/13