Recent content by jburns80

  1. J

    Oil coming from blow-by/overflow tube. -B7200

    I noticed yesterday that suddenly oil levels were extremely high. Started the tractor and suddenly oil was blowing out of what seems like an overflow tube on the crank case. After some research seems like it could be a couple of things. I know it may be the hydraulic pump with a bad seal...
  2. J

    B7200 Tire information/experience

    I had asked a few days ago about the front tires on my B7200. Apparently Kubota for a time used bolt together rims on the front, the Model of the RIM is B8731. However I didn't find much information on them so I had to learn the old fashioned way, talking to some folks and tinkering on my own...
  3. J

    B7200 Front Rim and Tire

    The two tires that came off had no tube, but I can use one.
  4. J

    B7200 Front Rim and Tire

    Well because it wouldn't come off over the rim, I cut it off ha ha.
  5. J

    B7200 Front Rim and Tire

    Sorry. Heres pictures of the rim.
  6. J

    B7200 Front Rim and Tire

    I purchased a B7200 some months back and have been slowly replacing parts. This week I was focusing on Tires. The tires on there are 18x9.5-8 on the Front. It currently has completely dry rotted carlisle / kendra turf tires. I purchased a hi-lug replacement. However getting the tire on the...
  7. J

    B7200 Seat Replacement

    Ironically that's the same seat I have in my cart lol. Thanks for the info.
  8. J

    B7200 Seat Replacement

    Which seat if I may ask, I've read reviews on some that needed heavy modifications to work
  9. J

    B7200 Seat Replacement

    Has anyone replaced the seat on the B7200? I see a few universal options on Amazon but want to make sure they're worth it before I invest.
  10. J

    Possibly a dumb question about PTO Speed. B7200

    I'm hoping it's just N/Low and that plate has to be changed because right now that lever only goes to off / on ha ha.
  11. J

    Possibly a dumb question about PTO Speed. B7200

    Yes, I read that, I was curious about the stop setting on the lever, given the age I was just being overly cautious maybe. I like to tinker and before I got to over thinking I wanted to reach out to other. Thank you for the reply
  12. J

    B7200 Hydraulic Fluid Change

    I have been researching over and over to find how to change the hydraulic fluid on a B7200 I acquired, I'm in the process of fully changing fluids, hoses and all that. I found a video where the guy changes B6100 Fluid, would it be the same process? Do I need to remove that casing between the...
  13. J

    Possibly a dumb question about PTO Speed. B7200

    I have acquired a B7200, not the HST version. I've looked all over kubotabooks.com and other places but can't find any definitive answer on setting the PTO speed. The PTO lever in forward seems to be moving way faster than 540 rpms, how do I know that I have the right PTO speed setting on this...
  14. J

    B7200 Finish Mower

    Thanks for the advice, I had just heard that newer implements were more efficient and would be easier on the old tractor but I'm new to tractor ownership so I'm still reading and learning as much as possible.