Recent content by DONLI

What does everyone use to seal, remove, or convert rust? Don

I just changed both fuel filters and the water seperater filter had a large amount of black slimy stuff in it. I asumed it was bad so I put a chemical in it to stop the nasty stuff from growing. The tractor ran good before I changed filters, when do you think I should change the filters again...

I just changed the fuel filters on my L3301, what a bpia it is to get to the shutoff valve and get tha filter bowl off. ( Sure not as easy as my L3010 GST that I wish I still had!) Anyway does anyone know of a bracket to relocate it to a place that is easier to get to? Thank you! Don

Thank you all. I cked the front tires and they both apear to have about 1/2 of there tread left, I thi Edit! the prvious owner ran it in 4wd all the time so front tires are worn about 50 %. So I think I will just run them until I cant then replace both front tires. Thanks for all the help. Don

I was thinking of replacing just the one frony tire of same size, brand and tread style! Don

I have R1 tire on my L3301HST and the left front is badly checked, it looks like that side of the tractor was parked in the sun a lot as that side the paint is fadded more than the other side. Questio can I replace that 1 tire or should I replace both front tires? There is only 540 hrs on the...

Most if not all delivery drivers have never been given any instruction on driving anything bigger tha a golf cart! There should be mandatory drivers training by any company that makes deliveries. Several years ago I lived near a very small town and whatched a beer truck get hungup in a short...

Used the L3301 to move snow around. Don

I do not think that there is a problem, and what you are seeing is normal! I have a zero turn mower ( not Kubota) and the inside wheel wil spin /slip on turns more so on tight turns. just my 2c! Don

70 s car! Don

I SECOND TnT (TOP AND TILT). YOU WILL NOT REGRET IT! DON

Thank you Dan. Don

Dan I was referring to this kit from EBAY, do you know if it will fit a L3301 with a LA525 loader? Thanks ! Don

Thank you Dan. Do you know if it will fit a L3301 with a LA525 loader? Don

Yes that is the one. Fast fingers and slow brain is my only defence!! And yes I have done it before. I figure about $250 for hoses, there is a shop here that makes them to order. Thant you! Don