Search results

ITS a bolt Don't over think it! Buy a bolt that fits! Don

I have a L3301 HST and just fill rear tires with RV antifreese it is good down to -50 F 30 gal each, it was cheap on sale $2.96 a gal. added about 520 lbs to the rear. Well worth it , I had an L3010 GST an had water in the rear tires( no temps much below freesing where I lived at the time) and...

15X19.5 is not a 15 tall tire its a 15 wide tire mounted on a 19.5 rim!! Don

For my WIFE to get her stuff out would be great!!! Don PS. The shop that is!!!

You are correct MY BIG MISSTAKE!! I was reading swop 180 as moving one side to the other! And not rotating 180. Sorry for the missinforation!! Don

I do not think rotating the auger 180 will work as the holes for the shear pins will not work! I think you have to swop right auger for left auger end for end! Don

That was what I was going to do but after spraing the Hump I thought what the h--- and did the rest of that area. Also it leaves it open so most of the dirt can fall out through the holes and not have to be sheveled out all the time. Don

I used spray on bed liner for mine. worked good so far. Don

Snowblower is the ONLY way to go!! Don

I think yu have to have the mower deck mounted to the tractor BEFORE the PTO wil work properly! Just my 2c as I do not, or never had that type mower. Don

Yes that is it! Don

Marine tec two part epoxy, I have repaired many things with, including carbs, and plasitcs. Don

" C " clamps and a chain and put it in reverce and pull it out! Don

It does not matter on what ground it is on, what I can not say is if it is only when in 4 wheel drive, I will have to ck that next time I have it out. I do know that it does this wheather there is a load on the front or not. Right now I am doing some lighting wiring so not going to start it up...

Loader and 3pt work fine even when steering is hard! Just bought this tractor in mid June has 500hrs, do not know when fluids and filters wheree changed. Been wanting to do it all but have not had time, was thinking to do them in the spring when I can bring it out and work on it in the Sunshine...

It is not constant, sometimes it"s fine and then it"s not, RPMs at idle or 2500 make very little diference when it happens. Hydro oil is full and everything else works fine. Thanks! Don

Thanks everyone! Don

OK! you got me in a moment of a frail mind! She is 87! And has been doing this for about two yrs! Little dog LOVES it! Thats OK! I hace thick skin! Don

My wife of 87yrs makes the food for our Grand Dog, but she uses all freash veggies! Don

Thank you! I looked in the WSM and never found it, could be that I was going cross eyed trying to read it on my laptop! Thanks! Don