Recent content by amsrn13

  1. A

    kubota 7100 load distribution block

    Im rebuilding the hst , Im trying to make it as stock as possible
  2. A

    kubota 7100 load distribution block

    So I know I’m sorry, so I purchase a 7100d and a newer 7100hst with a smc q60 loader. I took the oil line with the block off the hst and modified it to fit the older 7100, which required me to shorten and tig weld the oem line. Now that I understand exactly how this operates I see How simple...
  3. A

    kubota 7100 load distribution block

    I have a 93 hst that’s missing the entire oil line off off of the hydraulic pump , I’ll either have to bend some pipe … or just make some custom hoses
  4. A

    kubota 7100 load distribution block

    I appreciate the info , going to make some on my cnc.
  5. A

    kubota 7100 load distribution block

    By the looks of it you could technically drill two holes , come in from the side to meet the holes and just tap for a jic fitting . Why do they split it in half
  6. A

    kubota 7100 load distribution block

    the inlet doesn’t connect to bother hydraulic ports ? It looks like it comes in from the inlet and out the hydraulic line on the right ?
  7. A

    kubota 7100 load distribution block

    I recently retrofitted a 7100 hst smc q60 loader on to my older manual 7100 as the motor is bad on the hst. Off of the hydraulic pump on the side of the motor is a hard line that connects to an aluminum/steel block with two hydraulic ports. What exactly does this do. I saw a post before where a...
  8. A

    Smc q60 loader on 7100

    This is the manual , “gear oil 80” is that hydraulic fluid ?
  9. A

    Smc q60 loader on 7100

    You cant remove the fittimg without removing the entire housing from the hst, the manual 7100 as you can see is also a tight fit . I’ll need to use something that is compact. I’m still confused as to how this works. That port on my manual 7100 says “gear oil” does the loader on the Manual use...
  10. A

    Smc q60 loader on 7100

    I started to swap ovet The loader, I still need a fitting for the return
  11. A

    Smc q60 loader on 7100

    You are correct . Do these serve the same purpose? That is both are fill ports for the hydraulic fluid? Like I said one is a 93 hst the other a manual from the early 80s
  12. A

    Smc q60 loader on 7100

    So I recently picked up a 7100d non hst tractor and a 92 7100hst that needs a motor rebuild. I took the loader off the hst and I’m trying to figure out the correct fitting that goes next to the seat. It appears to be a drain line that comes off that aluminum housing on the right side of the...
  13. A

    Kubota Hst project .. what year ?

    Wow really 1992 ? It came with a smc q60 loader as well