L245DT help

[Eaglenest]

Anyone know why when I lift FEL left side goes up faster than the right side and binds any help would be very appreciated

 

[Russell King]

Possibly the cylinder seal has failed on the slow side so oil just moves from one side to the other instead of moving the ram?

Possibly there is some obstruction in the hose going to the slow cylinder?

 

[PoTreeBoy]

Anyone know why when I lift FEL left side goes up faster than the right side and binds any help would be very appreciated

Maybe a bent rod? Pictures or videos would help. You can post picture files directly, there may be a 5? post minimum before pictures are allowed. For videos, post on Youtube or other host site and post a link here.

 

[Eaglenest]

Maybe a bent rod? Pictures or videos would help. You can post picture files directly, there may be a 5? post minimum before pictures are allowed. For videos, post on Youtube or other host site and post a link here.

Thanks I’ll try

 

[Eaglenest]

Possibly the cylinder seal has failed on the slow side so oil just moves from one side to the other instead of moving the ram?

Possibly there is some obstruction in the hose going to the slow cylinder?

Could it be the control valve?

 

[PoTreeBoy]

Could it be the control valve?

I don't see any way the valve could be causing your issue. BTW, is this something that started suddenly, developed slowly, has happened as long as you've owned it, etc.?

 

[Eaglenest]

I don't see any way the valve could be causing your issue. BTW, is this something that started suddenly, developed slowly, has happened as long as you've owned it, etc.?

Recently purchased the tractor and started to fix it up and noticed this problem

 

[North Idaho Wolfman]

Could it be the control valve?

Nope not possible
Sounds like a pin / pivot point issue or possibly a cylinder issue.