I’m still troubleshooting the loss of lift on my LA680/L3600. I have full tilt capability, but no lift/lower. If I swap coupler banks, I lose tilt and gain lift back. The control lever works fine left to right, and seems to go forward, but not back. It stops completely back at the center point and won’t go back any further. Water frozen in the cable sleeve is not the issue, the unit is in a heated area and fully thawed. Here’s a link to a video of the symptoms. I did have the cable sleeve uninstalled at the time, but it’s reconnected now with no change.
TIA guys…
TIA guys…
January 27, 2024
youtube.com