K Kubotasidewalkdude New member Equipment L3940 HST Dec 6, 2016 43 0 0 Canada Dec 6, 2016 #1 How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done. Sent from my iPhone using Tapatalk
How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done. Sent from my iPhone using Tapatalk
85Hokie Moderator Staff member Lifetime Member Equipment BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL Jul 13, 2013 10,401 2,201 113 Bedford - VA Dec 6, 2016 #2 Kubotasidewalkdude said: How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done. Sent from my iPhone using Tapatalk Click to expand... First and foremost - find you a work shop manual, and or do research here. Also - on your other thread - I would inspect the cable on the E brake and lube it well.
Kubotasidewalkdude said: How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done. Sent from my iPhone using Tapatalk Click to expand... First and foremost - find you a work shop manual, and or do research here. Also - on your other thread - I would inspect the cable on the E brake and lube it well.
North Idaho Wolfman Moderator Staff member Lifetime Member Equipment L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more Jun 9, 2013 28,862 5,220 113 Sandpoint, ID Dec 6, 2016 #3 Unless I'm missing something it's pretty strait forward on that model: You just loosen the alternator and remove the belt carefully guiding it over the fan, then do the reverse to install. I would also recommend you getting the WSM (Work Shop Manual, AKA Service Manual), full of a ton of information.
Unless I'm missing something it's pretty strait forward on that model: You just loosen the alternator and remove the belt carefully guiding it over the fan, then do the reverse to install. I would also recommend you getting the WSM (Work Shop Manual, AKA Service Manual), full of a ton of information.
K Kubotasidewalkdude New member Equipment L3940 HST Dec 6, 2016 43 0 0 Canada Dec 6, 2016 #4 It's not that easy. Although from what I'm reading it isn't to hard either. It's gotta be fished in some how after loosening a few bolts Sent from my iPhone using Tapatalk
It's not that easy. Although from what I'm reading it isn't to hard either. It's gotta be fished in some how after loosening a few bolts Sent from my iPhone using Tapatalk