Search results

I'm a Revit user. I quite enjoy 3d modeling of old historic buildings. I've grown to dislike Autocad with a passion after Revit. But there are some very good low cost options to Autocad for occasional use including Intellicad.

Took mine off the first year I had it. They are nothing but a pain. I hated taking them off after each mowing to clean out. BUT by far the best thing I ever did with that deck was sell it and buy a zero turn. Now the BX gets out of mowing duty and my lawn gets mowed in only an hour and a...

Been there, done that. Bend it back and all is good. I used a large pair of vice grips. Sent from my SM-G975U using Tapatalk

Took care of my leak. Put these one. have had no issues since https://www.amazon.com/gp/product/B01JUMBI22/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have a bx2350 with about 1,000 hours on it. It's been a great little machine and has really given me no issues in over 800 hours (I bought it at just under 400). Earlier this summer while mowing it would lose power after mowing for about 30 minutes to an hour. I replaced the filters...

Check your hst pedal safety switch. Mine wouldn't start the other day, bumped it by mistake and it started. I mention this because you said that you worked on the pedal.

Blades are not bent. I am going to check to verify that all three spindles are equal in height.

Thanks for the replies. I'd like a zero turn. Have to add on again to keep it inside. Not sure if you can see by the photos, but the first photo is tonight's mowing. The photo over the hood is 6 days of growth. The darker is normal wheel tracks and is about an inch higher than between...

2 1/2 hours without trimming with the string trimmer. Not a lot of trees to mow around. yes, they are installed correctly. I've owned many mowers of the years. some cut better than others, but not as poorly as this one. I was out mowing tonight and I mowed about an inch off the top max at the...

All good questions 3" or 4" inches tall. I have my deck set on 3, but it mows much shorter than 3" Yes, mowing at 3,200 rpm I mowed wide open in low side, and about halfway in high side. made no difference grass was dry. I used to have a belly mower on a 1948 VAC Case that did a great job...

I have a bx2350 with a 60" mmm. I bought the tractor used with about 400 hours on the clock about 4 or 5 years ago. From the time I bought it, I have not liked the mower. It does a horrible job mowing. I have adjusted, sharpened, leveled, the deck I don't know how may times. It refuses to...

My daughter is interning for John Deere Financial this summer. I kept promising her that if they didn't give her coffee mug, I was going to buy her a kubota mug to use. She got a mug from deere. She also brought me home a nice cap. Is it cheating to wear a Deere hat when using a Kubota tractor?

I have a Bx2350 and it has a Woods loader on it. Probably as well built as OEM. They still make the same loader

Don't know for sure with a bagger, but I have gator blades on my bx. Tough as nails. I snagged a brick with one, broke it into pieces and sent it flying through the side window of the jeep sitting nearby, just put a small nick in the blade. I'm on my 3rd year with them and only sharpened them...

I have a slip clutch on my tiller. After thinking I had it adjusted, hit a couple of things that killed the bx. I now every spring loosen the spring bolts, and engage the tiller in the ground to make sure it slips good for several seconds. Then just snug up the bolts. I keep the wrenches...

I grew up moving snow with a rear angle blade on a 8n Ford. Had a few times the drifts got so hard, the tractor just drove over them. This year we got 60" of snow. I use a rear BLOWER on my BX. Loader up front for scraping and clean up. I would like a pusher for the front. The bucket...

Finally got around to getting the tires mounted this afternoon. Took them to the tire shop, it was more than I have equipment for at home. I have 20 pounds of air pressure and I'm just a moment. That's probably too much.

I was thinking the same thing.

Got my tires today. I was going to attempt to mount them myself, but these sidewalks are pretty tough.

I'm sure the ride will be rougher. Can't be much rougher than my yard is currently. They are cheaper than stock 4 plys from what I've found.