Search results

Hey guys I checked this a.m. I put the stems at 9 and 3 and just tapped them slightly and water squirted out!! Thanks for the help

Thanks guys I will check tommorrow and update.

Compact pallet forks for sale. Up to 50 hp tractor, max lift capacity 1800#. Standard skid steer quick attach. Used a few times to lift fifth wheel hitch out of truck. Selling for $600 please pm me. Im putting pictures in my garage Im not sure how to load pics on the add.

Hey bulldog I found on tractor.net this quote: "Those o-rings (usually square cut) only serve to keep paint away from the cylinder rod's dust wiper located in the cylinder gland. Once the paint dries and the cylinder leaves the factory, the useful life of those o-rings is over and they are just...

Thanks for the reply bulldog....I just brought this tractor home last week it has 3 hrs on it and all the rubber rings stay down at the end of the shaft, honestly thats how they were when I picked it up I just didn't notice it until I washed the tractor. So this is not normal for a brand new...

After the dealer said it was ready to go, I asked did he fill up the rear tires. He looked at me like......wooops, and then proceeded to tell me they just havent done that yet go get lunch and they will be filled when you get back. An hour later we get back and I pull up to find one of the...

Thats kind of what Im coming up with, I went to TSC and found some CAT 3 bushing that are roughly 3", when I put my arms to the outer part of the clevis and have the bushing on the inside when the mower slides its only about 3" either way, thanks for all the replies guys, 5 min. of posting...

Yes, he said it needed to swing side to side so if you run over something you wont break any linkage. My thought was thats why they put a slip clutch, and stump jumper on these machines. Yeah your right there is no way Im going to let that much weight swing around, also it is a CAT 1 or 2...

I just p/u the MX5100 from the dealer, he was showing me how I need to hook up the RCF2772 Landpride rotary cutter. He told me to leave 4"-8" of swing on cutter, and that if I left it ridgid I could break something if I was to hit anything. Correct me if Im wrong but isn't that what the slip...

Anyone have any ideas?

Thats good to know....I guess I never realized it on the L3700. Is there a way to adjust the fueling so it smokes less?

Skeeter, I just p/u my MX5100 last week, asked the dealer the same question. They said Kubota runs the motors before they send them out, so theyre ready when delivered. I personally let mine idle for about and hour and then have been working around the house but not taking the rpm's over 2000...

Hey guys I just traded my L3700su in on a MX5100. I brought it home and started picking it apart. Other than the lighter color orange of the body as compared to the loader arms, I noticed on the cylinders that there is a rubber ring around the arms. They look like they should be attached to...

if you still have the bh77 I am interested please pm me

Thanks guys that makes a lot a sense. I was just curious I really don't need any more lifting for my everyday use I just thought it would be nice if they made bigger direct replacements, Thanks for all the replies

Hey guys Im trying to get more lift capacity out of my LA463 loader. Is it possible to just add bigger piston from the factory with greater capacities to accomplish this? Or will I have to fabricate brackets?

LDB, I have a bushhog brand, there is a picture in my garage. This was one of the heaviest duty I found. great for clearing land with the drop down tines. It was a bit pricey @ $ 800 but Im a firm believer you get what you pay for!

Yeah I've been thinking of ways to actually make it work, I'll see what I can do on picutres

Hey guys my dad has an old work truck with a Reading work box on the back, the bottom has rusted out of the bed. He called and asked the other day if he thought we could lift the bed off the truck with my tractor, I told him I honestly dont know. I know I can lift prob 1300lbs with an A463...

Hey guys pretty new to the tractor world. I have 8 hrs on my L3700. I know I should grease all zerks fittings at 10 hrs, other than what the manual tells me is there anything else I should worry about?